|
vendobaldtops
Guest
|
 |
« Reply #30 on: May 20, 2006, 03:25:46 pm » |
|
Dave,
Indeed, it looks like you are missing the cam cylinder under the bottle rack. Funtronics sells it for 40 USD, I believe. If you get a handle, the back rod for the door liner, and the cam, I think you should be in good shape assuming the coin mech works and is not rusted shut.
If the coin mech works, you will crank the handle, it will turn the coin mech rod, the door liner rod will turn and move that t-bar (at the bottom of the bottle door inside liner, the t-rodwill then fit into the cam under the bottle rack and vend.
When it vends, it will only allow you to grab a drink from one of the seven slots; the rest will lock up. And again, each slot / shelf you can fill with different soda, beer, coolers, etc.
|
