Vendo 39 ??- back cover and WIRE RAck to keep bottles out of drip pan?

[Jonathan816]

I see some Vendo 39's have the back plate that protecting the cooling system and some that don't.

Also see pic below of picture of wire shelf keeping bottles off the bottom.... is this original or custom?

Was this an option? Or was this something added by a distributor?

Thanks for letting me pick your brains.

[Ltransam]

 The Early Models had the Covers

[Jonathan816]

Thank you very much for the answer.

[bcharlton]

I think the covers were also designed to keep the machines about 3 inches from the wall for better air flow for the condenser deck.



Brian

[Jonathan816]

Thanks - Also.. Does anyone know if these machines ever came with a wire piece to have the bottles in the precool section not sit directly on the pan?

[collecture]

Thanks - Also.. Does anyone know if these machines ever came with a wire piece to have the bottles in the precool section not sit directly on the pan?

The wire rack is not original

[Jonathan816]

Thanks Tom.

[coke_and_stuff]

You state in your auction that the embossed Ice Cold and that the rear cover are very rare but infact that is very common, Ive restored and owned countless Vendo 39s all but a few had the embossed Ice cold on the lower front door, and alot have had the rear cover. Not rare at all remember over 80,000 Vendo 39s were built.

Joey

[Jonathan816]

Since the "Ice Cold" was on only the first generation, that's why i put it as such, as it's rarer to come across from what I've been told then the 2nd and 3rd generation...  If I'm wrong, I'll fix it though.

[Jonathan816]

You state in your auction that the embossed Ice Cold and that the rear cover are very rare but infact that is very common, Ive restored and owned countless Vendo 39s all but a few had the embossed Ice cold on the lower front door, and alot have had the rear cover. Not rare at all remember over 80,000 Vendo 39s were built.

Joey

I's all about what peoples perception is of rare....

According to cola machines.com it's in the middle with 3 out of 5 stars, therefore more rare then 50% of the machines out there(or so is my take). And since it has the piece on the back, it would make it slightly rarer as not all the 1st generation were made with these from my understanding)

However since you feel it is inaccurate, I'll remove it once I'm allowed to edit the auction.