help with a machine

[VMAXMAN]

I posted this a couple days ago....I think I put it in the wrong section tho....no replies
http://soda-machines.com/discussions/index.php?topic=1297.msg70885#msg70885

[Ltransam]

 First Off, Welcome To the Site & Your First Machine !! There WILL BE MORE !!!

 Your machine is newer then most of us collect . I had a Problem like yours is having with the amount .You'll either Need to Clean your Coin Mech ?? or replace it (I had to Replace It ) And Are you Sure the Cans arn't hung up in the Drop chute ? There are Many diffrent type dispencing systems Screw drive -Lever Drop- Rolling Trays OR Hoppers I'd search the Net for a Manual with luck you might find one ?? But There Are Guys here that know WAY more then Me !!
                                       Good Luck !!
                                                                   Ltransam

[Pat Pixley]

 Welcome to the site and one machine down a dozen more to come .
 Like Leonard said it is a little to new for some of us  .
  But I'm sure someone will jump in  and help .

[tkaz]

I had a similiar problem with a Coinco S75-9800B coin mech, it would always take different amounts of change, no rhyme or reason.  It ended up needing an adjustment on one of the coin counting switches.  I made sure that was in spec (you can get most of the manuals for mechs on the downloads page to the right).  It took a little bending of the wire, and there is a visible marking on the back side of the switch that lets you know it's adjusted properly.  I can send you some photos or guide you through the troubleshooting if you think it might be that.

[VMAXMAN]

thanks for welcoming me guys... machine runs great!
everything flows smoothly.
Just looking to find out what yr (s) these were made and where I can get parts.
I also have a 1968 vendo 154 which sits on my enclosed porch and also work 100%
I paid 50.00 each for these.... had the 154 for almost a yr now.
Randy