Vendo 56 is home to stay!!

I usually completely break down the rejector. Every bolt, nut spring - all of it. They are not rocket science and all of them are basically the same. The only difference between them is the adjustments. I take everything and wash it well with soap and water. OOO steel wool or an SOS pad on the main plate, but just soap and water on the other parts. If the coin cradle posts are cruddy, I might take a Dremel brass wire brush to them, but usually a couple of twists with the OOO steel wool will do the trick. All the coin cradles are usually brass and will polish up real nice and shiny. I usually give the coin cradle post holes a reem or two with a solvent soaked pipe cleaner and a shot of powdered graphite before I reassemble it. Lastly, I make the adjustments to the separators and deflectors using my NRI N/D/Q test slugs. I usually do all of this depending on how nice I want it. They work flawlessly after all of this is done and don't need much attention afterwards.

	Author	Topic: Vendo 56 is home to stay!! (Read 10222 times)
0 Members and 1 Guest are viewing this topic.