Vendalator 56

[BryanH]

Kevin - if you get it, check out my VMC56 wanted parts list and PM with what you have and what you want for the parts.

Thanks!  I have tried sodajerkworks, and Steve has stated that they don't carry the "Coin Entry Bezel"  for my VMC-56.  This is the whole bezel that you deposit your coins and push down the lever for coin return..  
Kevin C. if you do happen to pick up that VMC 56 I would be intrested in some parts.
J 64 - if you happen to come across one this weekend or anytime soon, please grap it for me, and let me know how much you want for it!
I have attached a picture of my machine with the missing "Coin Entry Bezel"

[Kevin C]

Hey

Nice machine but where does it despense the bottles?

Kevin

Opps wrong picture...  Sorry everyone!!!  That was my wife's ebay selling pictures!

Here is the correct picture!

[jasmine64]

So what you need is the part that weighs about 4 lbs.
all in one coin slot entry and return lever. (The mechanical part).

You said bezel and I automatically thought trim piece.

Have you tried bitw.com?

I just recently got an internal wiring harness from them for my
Vendo 63.

You would need the operations manager I think his name is Jack.
Give him an email see what he may have in salvage parts.

[BryanH]

Quote (Gsaenz @ June 22 2005,10:00)

I have attached a picture of my machine with the missing "Coin Entry Bezel"

With that coin entry bezel, I'm afraid to ask what you're vending?   '>

[BryanH]

Gsaenz - Ok now that I got my shot out of the way... I misread your original post.  I thought you wanted the coin return bezel.  I now understand that you want the coin entry which Jasmine described and you posted in your second pic.  You're right, it's not a part that anyone carries.  I have seen one or two on eBay for around $10 but not for a couple months.  

I'd rig up the machine to free vend until you find the bezel.  At least you can use it while you wait.

[Kevin C]

Hello

Are Vendo 56's & Vendolator 56's the same machine? They sure do look like they are twins.

Hey what is a VMC  ?

Kevin

Thanks everyone for the info!  I have been looking everywhere for this bezel with no luck!  I have Steve at sodajerkworks looking out for one for me...  The machine vends I just have to stick my fingers in and down to place the dime into the coin mech.  As for Ebay I havent come across one yet.
Thanks J64 I'm going to give Jack a try and see what he might have laying around.

[BryanH]

Quote (Kevin C @ June 22 2005,1:58)

Hello Are Vendo 56's & Vendolator 56's the same machine? They sure do look like they are twins. Hey what is a VMC  ? Kevin

Kevin - they're more like cousins than twins.  I think some parts are interchangeable but not all parts.  VMC = Vendorlator and V = Vendo.