SMC Discussion Areas
November 23, 2024, 04:20:27 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > The Coin Return > Other Coin-Op's (Moderators: johnieG, Jim, dr galaga) > Stoner candy restoration
Pages: [1] 2 3  All   Go Down
« previous next »
  Print  
Author Topic: Stoner candy restoration  (Read 16633 times)
0 Members and 1 Guest are viewing this topic.
Faza
Newbie
*
Offline Offline

Posts: 45
« on: March 24, 2019, 02:41:10 am »
I imported a stoner with gum mint vendor to Australia to restore, concentrating on the internal vending rack before starting on the enclosure.
All internal rack parts were chemically stripped of paint and powder coated.
A few pictures are attached and a few questions as well.
« Last Edit: March 24, 2019, 02:59:15 am by Faza » Logged
Faza
Newbie
*
Offline Offline

Posts: 45
« Reply #1 on: March 24, 2019, 03:02:00 am »
A few more pictures
Logged
Ltransam
Soda Jerks
*****
Offline Offline

Posts: 2727
« Reply #2 on: March 24, 2019, 08:19:15 am »


Very nice start !!!
Logged
Glascock Counter Top
VMC 81 7Up
Vendo-110-81D-V-56 V-23
Jacobs Pepsi-56
Stoner Cookie &5 Pull Pastry& 180 Candy
Kelvinator FS-51(Canada)
Cavalier's C-55-E-C-55-D
Selmix Sprite
Selmix Pepsi on Draugh
Faza
Newbie
*
Offline Offline

Posts: 45
« Reply #3 on: March 25, 2019, 05:43:08 pm »
I've hit a bit of a speed bump, pretty sure I know what the problem is but confirmation from someone that has restored stoners before would be great.
I've installed three off the gum merchandise chutes along with all of the linkages, I thought I would install the selector gear and check the operation of the gear assembly and that the gum is dispensed correctly.
The issue is when I select each one of the merchandise chutes the internal linkage does not clear the frame of the rack to allow the linkage to dispense the selected gum (As per photo 2).
Only one of the internal linkages clears the frame and allows the gum in that merchandise chutes to dispense correctly. (Photo 3).
I'm guessing that over time the selector cams wear and the horizontal gear assemblies don't slide far enough for the internal linkage to clear the frame.
When I disassembled the horizontal selector gear assemblies I noticed that the shaft that protrudes through the frame that connects the internal and external linkages were bent possibly to compensate for the worn selector cams.
(Photo 4).
Can anyone confirm that this is the case or am I missing something.
Cheers
John
Logged
Faza
Newbie
*
Offline Offline

Posts: 45
« Reply #4 on: March 25, 2019, 06:38:16 pm »
Photo 3
Logged
Faza
Newbie
*
Offline Offline

Posts: 45
« Reply #5 on: March 25, 2019, 06:48:29 pm »
Photo 4
Logged
Faza
Newbie
*
Offline Offline

Posts: 45
« Reply #6 on: March 28, 2019, 05:08:22 am »
Looks like no one has come across this issue Huh?
Logged
Faza
Newbie
*
Offline Offline

Posts: 45
« Reply #7 on: April 03, 2019, 11:49:17 pm »
Quick update for anyone else that has this problem, removed all of the merchandise chutes along with all of the linkages, found that the ejector drive arms were bent.
As merchandise chutes number 2 was working correctly I had a reference to bend the other 3 arms back into the correct shape.
Now waiting for zinc plating before continuing assembly.
Logged
Faza
Newbie
*
Offline Offline

Posts: 45
« Reply #8 on: April 03, 2019, 11:50:53 pm »
A few more pictures
Logged
Jim
Administrator
Soda Jerks
*****
Offline Offline

Posts: 5880


#1 Soda Jerk!


WWW
« Reply #9 on: April 04, 2019, 05:14:09 am »
John,
Your project is coming along nicely!  Thanks for sharing!
Logged
My six cents,

Jim
Pages: [1] 2 3  All   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!