Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine

[kdog]

So after 6 months of owning my Coke Vendo 56 square-top, I finally realized that the hinges on my coin door were't busted or loose, but are missing the 2 bottom screws that attach the door hinges to the machine, making the door sag when open.

Does anyone have screws that are suitable?

[Slapshot42]

The bottle door hinge to main door is a #10 x 1/2 Phillip truss with a #10 tooth lock washer . If you're talking about the bottle door.  

There are no hinges on the coin door.

[kdog]

The bottle door hinge to main door is a #10 x 1/2 Phillip truss with a #10 tooth lock washer . If you're talking about the bottle door.  

There are no hinges on the coin door.

Well maybe its called something else.  I will take a photo later and post it to show you.

[Slapshot42]

Pretty easy is this the the bottle door that is glass you open to vend product or the coin door that covers the coin mechanism??? 

[MoonDawg]

       The coin door uses the same screw Jared described, #10 x 1/2" pan head sheet metal screw.

[kdog]

Know what that screw is called in metric?

[Jim]

Metric would be a different size... Standard metric sized screws will be slightly larger or smaller than, but not the same size.