SMC Discussion Areas

The Vending Rack => Swap Meet Area => Topic started by: kdog on March 08, 2019, 07:12:55 AM



Title: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine
Post by: kdog on March 08, 2019, 07:12:55 AM
So after 6 months of owning my Coke Vendo 56 square-top, I finally realized that the hinges on my coin door were't busted or loose, but are missing the 2 bottom screws that attach the door hinges to the machine, making the door sag when open.

Does anyone have screws that are suitable?


Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine
Post by: Slapshot42 on March 08, 2019, 11:02:28 AM
The bottle door hinge to main door is a #10 x 1/2 Phillip truss with a #10 tooth lock washer . If you're talking about the bottle door.  

There are no hinges on the coin door.



Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine
Post by: kdog on March 10, 2019, 01:56:26 AM
The bottle door hinge to main door is a #10 x 1/2 Phillip truss with a #10 tooth lock washer . If you're talking about the bottle door.  

There are no hinges on the coin door.



Well maybe its called something else.  I will take a photo later and post it to show you.


Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine
Post by: Slapshot42 on March 10, 2019, 02:54:58 PM
Pretty easy is this the the bottle door that is glass you open to vend product or the coin door that covers the coin mechanism??? 


Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine
Post by: MoonDawg on March 10, 2019, 04:10:21 PM
       The coin door uses the same screw Jared described, #10 x 1/2" pan head sheet metal screw.


Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine
Post by: kdog on March 13, 2019, 06:53:54 AM
Know what that screw is called in metric?


Title: Re: Screws for the Coin Door Hinges on a Vendo 56-7 Squaretop Coke machine
Post by: Jim on March 13, 2019, 09:54:25 AM
Metric would be a different size... Standard metric sized screws will be slightly larger or smaller than, but not the same size.