I know I should replace it, but don't have funds for the new one and the crazy shipping for it, so I prettied up the liner, removed the broken 4 wire light switch, replaced it with a "new" one. I had to bend the light frame a little to get the new switch in place, apparently it was a slightly different model. The used one I got on ebay was only $10, So I am just dealing with it. I bent the frame back into position with no issues. If it happens again, maybe I will replace the whole thing, but I plan on being careful with the switch. You can see the shorter broken switch, the longer replacement switch installed and the machine with the light working. I still need to do a little more work before putting it all back together though. The main latch for the door is missing the sleeve in the back, so I have one of those on the way. Then I will clean it up and put it all back together.
![](https://scontent.fphl1-2.fna.fbcdn.net/v/t31.0-8/26910383_10156109251828221_126161889301239088_o.jpg?oh=61278969cf208b1bc5a8d92388acd79e&oe=5AE9E28F)
![](https://scontent.fphl1-2.fna.fbcdn.net/v/t31.0-8/20424182_10156109251823221_1274717061450628630_o.jpg?oh=66eb599cc0c05731597725ccfe497b6d&oe=5AEA5224)
![](https://scontent.fphl1-2.fna.fbcdn.net/v/t31.0-8/26841248_10156109251833221_6150327279862564044_o.jpg?oh=598a23ee957da4805134692c076448dc&oe=5AE64748)
![](https://scontent.fphl1-2.fna.fbcdn.net/v/t31.0-8/26952414_10156109252108221_6371341753942632090_o.jpg?oh=a7b8657fd89c21ca887958dcc132c874&oe=5AEAAC04)