I know I should replace it, but don't have funds for the new one and the crazy shipping for it, so I prettied up the liner, removed the broken 4 wire light switch, replaced it with a "new" one. I had to bend the light frame a little to get the new switch in place, apparently it was a slightly different model. The used one I got on ebay was only $10, So I am just dealing with it. I bent the frame back into position with no issues. If it happens again, maybe I will replace the whole thing, but I plan on being careful with the switch. You can see the shorter broken switch, the longer replacement switch installed and the machine with the light working. I still need to do a little more work before putting it all back together though. The main latch for the door is missing the sleeve in the back, so I have one of those on the way. Then I will clean it up and put it all back together.