Westinghouse Master Agitator impeller

[First Timer]

Can anyone point me in a direction as to where to find an impeller for the agitator. My agitator works fine just no impeller.......

Any help would be greatly appreciated.

DP

[johnieG]

Both Funtronics & SodaJerkWerks offer replacement motors & impellers, however their replacement impellers may not fit your OEM motors shaft.

[First Timer]

Thanks for the reply. I will contact them and see. I have seen the motor replacement. Just not the impeller by itself.

Maybe it will be such that I can modify one or the other to make it work.


DP

[Jim]

If nobody sells the impeller separately, let me know as I have an extra impeller from a recent project...

[Blind1968]

If someone has one off or out of the machine and could post a pic of it for you to see. There is not much to it and could be fabricated fairly easily. 

[First Timer]

I might take you up on your offer.

If I could get a pic it would help.

At least I would know what I'm looking for.

[First Timer]

Jim,

Would you be willing to sell me the one you were referring to?

Just let me know.

Thanks
DP

[Jim]

DP,

Here a few photos of the impeller...
It is for a 1/4" shaft and is 2" dia.

Let me know if this will fit your needs and please double check diameters to ensure proper clearances!

[First Timer]

Jim

I believe that will work. The end of my shaft is 1/4 20 threaded with a flat side on the shaft. When assembled the shaft is approx 1/2" or more below my evaporator. So I should have plenty clearance.

DP