SMC Discussion Areas
November 23, 2024, 11:43:39 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Soda Machines, Coolers & Dispensers > Post 60's Machines & Coolers (Moderators: johnieG, Jim) > Fan for Cavalier USS-8-64
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Fan for Cavalier USS-8-64  (Read 3414 times)
0 Members and 1 Guest are viewing this topic.
Coke536
Newbie
*
Offline Offline

Posts: 25
« on: December 16, 2013, 03:07:33 pm »
The fan on my USS-8-64 appears to be the wrong type (notice the wood blocks in the picture).  It's so high that the bottom row from the can vending needed to be removed.  Are there replacement fans available that are "flatter" that will allow using the botton row for can dispensing? 

Is a there ususally a cover than goes over the fan blades?

Thanks,

Jim
Logged
Coke Cavalier CSS-8-64 & USS-8-64- purchased Oct 2013
Fire708
25 Cent Member
****
Offline Offline

Posts: 317
« Reply #1 on: December 16, 2013, 04:56:43 pm »
Call funtronics or soda jerk works. Both are very good to deal with and very helpful.

You can find links to their sites on the main SMC page.
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227
« Reply #2 on: December 16, 2013, 05:22:11 pm »
       The fan should blow air directly accross the evaporator coils. The picture looks like a plate has been mounted between them?

       Below is a C- 64 evaporator and fan viewed from the backside.
Logged
Glen
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom
« Reply #3 on: December 16, 2013, 07:03:13 pm »
It looks like you have the wrong motor installed on yours. Glen's motor type is readily available from either supplier and should solve your height issue.
Logged
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Pixel
Soda Jerks
*****
Offline Offline

Posts: 872
« Reply #4 on: December 16, 2013, 07:50:20 pm »
The original fan motor probably went bad in it, and someone "made do" a replacement.

Experts, is this the right motor?

http://www.fun-tronicsllc.com/index.php?crn=233&rn=610&action=show_detail
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!