Quikold Standard Front Strips

[ld26]

yes looks similar, thanks, I'm going to try to exhaust all efforts to get originals first though, Eric was also saying that they sell it in lengths on ebay as well...

[BONOVOX]

wow, now that's going Macgyver!  Good thought!

 

[johnieG]

Looks like the main door side trim from a Westinghouse WC-78 could be cut to fit.

Those trim strips are about the same width, but you'll have a bugger of a time getting them to fit the curve at the top of the Quikold with having them kink.  the trim off of a Victor cooler could be cut to fit too.

[Kilroy]

http://www.eagle-aluminum.com/

I have no affiliation with  this company,  , save the link when it comes time for counter trim  in the kitchen redo.

Yeah, you can look for original trim, but I think you will have a lot of time on your hands while you do

[ld26]

thanks for the info guys, I'll keep looking for original until I can't wait any longer

[Ltransam]

 Here's the Stainless I removed from an Old General Cooler The 2 long ones are 30 inch's and the short 2 are 15 inch's  They use a slide in clip .I know I had the clips at one time But can not locate them know

[Eric]

On the short ones... can you measure tip to tip... the chrome pieces on my Pepsi are about 16.25, if including the curved part..
I think these shorter pieces might be what he needs.. And are they smooth not debossed ribs running down them?
Way to go!

[tkaz]

Would these work, there's a couple of auctions for each one

http://www.ebay.com/itm/40s-vintage-double-dot-Pepsi-Cola-cooler-machine-GE-General-Electric-TRIM-1-/321176821295?pt=LH_DefaultDomain_0&hash=item4ac7a15e2f

[ld26]

those ge ones on ebay are a little different, have ridges, thanks though

[Seven181]

I might sell parts off mine, if the cooler does not sell on ebay.