|
Pat Pixley
Guest
|
 |
« on: August 27, 2012, 10:38:47 pm » |
|
Well we all hate when a part does not come back from ________ (fill in the blank Chromer , powder coater, who ever) and then you get a call from________ and they have sent it out then your good . Well this case my chromer had two of us in that deal with soda machine parts well two of my parts ended up by mistake going to this other person( the guy that was wrapping the parts know it went to this other person) Got my box of chrome and those two parts are missing called my chromer told him he has a picture of what came in and what went out (does this with everybody) told me he would call me back had to make a call to the other customer , Well after a hour went by my chromer called me and said the other customer said they did not get it . I say OK. chromer said he will get those parts for me and get them sent out with my other parts and we are good . Well I was looking around some other sites and stopped by this person's site and he had a machine done and had a picture of the inside of the coin door area and every thing was painted except two parts !!the same two that came up missing that this customer said he did not have  I came close to calling him and call him what he is a thieve , and then I thought I would let people know here and call him out here (he does come to the site ) But cooler heads pervailed , This person know what he did and it will catch up with him. And if this person read this I'm going to let you know I will not help you out, I will not hook you up with parts, I will not store a machine for you, and I will let our other mutual friends know what happenedand what you really are . |
|
|
|
|
Logged
|
|
|
|
|
Slapshot42
|
|
« Reply #1 on: August 27, 2012, 10:51:05 pm » |
|
Sorry to heat Pat. I have a great chomer in Spokane, WA. Let me know if you need some assistance. I hope the parts re surface and perhaps there was a mis communication?? ( Optimistic).
Jared
|
|
|
|
|
Logged
|
|
|
|
|
Creighton
|
|
« Reply #2 on: August 27, 2012, 11:33:16 pm » |
|
Well that be a mess. Hope it works out. Jared's recomended chrome shop is two miles from the house. Next time around holler and it's covered.
Creighton
|
|
|
|
|
Logged
|
|
|
|
|
Pat Pixley
Guest
|
|
« Reply #3 on: August 27, 2012, 11:57:34 pm » |
|
Thanks for the offer guy's but I wont change up Chrome plater's he is made good on these parts  . It's this person that took what did not belong to him and when asked he said (OH No!!I don't have them ) I've seen him on this site what a A*****e .  |
|
|
|
« Last Edit: August 28, 2012, 12:00:16 am by johnieG »
|
Logged
|
|
|
|
buzz4041
5 Cent Member
 Offline
Posts: 92
Buzz's Shop
|
|
« Reply #4 on: August 28, 2012, 03:36:03 am » |
|
Dishonest people just suck don't they. Karma will get them.
|
|
|
|
|
Logged
|
VMC 33 7UP original
VMC 81 7UP original restored
|
|
|
|
kbareit
|
|
« Reply #5 on: August 28, 2012, 05:41:12 am » |
|
Thats just wrong. If it doesn't belong to you give it back. It's not like the parts Fairy dropped them off.
|
|
|
|
« Last Edit: August 28, 2012, 07:16:20 am by johnieG »
|
Logged
|
Cavalier 27
Jacobs 26
Ideal 55 Hires root beer, 7-Up restored
Ideal 55 Pepsi, Barqs original
Double cola,Squirt,Nesbitts,Canada Dry on deck
3 Westy 60's
3 Westy 78's
Cav 72 original
S&S 1400 WD2 Pepsi
Stoner Junior
|
|
|
|
Funtronics
|
|
« Reply #6 on: August 28, 2012, 06:45:11 am » |
|
Thats just wrong. If it doesn't belong to you give it back. It's not like the parts Ferry dropped them off.
Where can I find the parts Fairyy  I need to talk to him...  Sorry to hear about your bad experience Pat.  |
|
|
|
« Last Edit: August 28, 2012, 07:16:38 am by johnieG »
|
Logged
|
Rod
Fun-Tronics
|
|
|
|
memorylane
|
|
« Reply #7 on: August 28, 2012, 06:55:19 am » |
|
What parts were they Pat? Post us a picture of the machine there on. Funtronics always has parts.....lol....Happy it worked out for ya. Thumbs down on the scum who took your parts.
|
|
|
|
|
Logged
|
|
|
|
|
Blind1968
|
|
« Reply #8 on: August 28, 2012, 09:09:53 am » |
|
What a jerk!!! Well it sounds like he has burnt a bridge more valuable than those two little parts. It is his loss and I an sure it was for the better.
|
|
|
|
|
Logged
|
~ Bryan
|
|
|
|
|
|
TomFromJersey
|
|
« Reply #10 on: August 28, 2012, 07:13:06 pm » |
|
I say through it out there Pat. If the guy flat-out lied about having the parts, he deserves the publicity that comes with his actions. Just my 2 cents.
TFJ
|
|
|
|
|
Logged
|
Grapette Quickold Standard
AMI I200 AMI H200
Wurlitzer 61, 600, 700, 750, 800, 1080, 2100
Packard Musical Bar
Chicago Coin BandBox
15 remote speakers and counting
A bunch of Grapette stuff
Some really cool vending machines
|
|
|
|
johnieG
|
|
« Reply #11 on: August 28, 2012, 07:19:48 pm » |
|
Easy now...or I'll have to start pruning the posts...JohnieG |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Larry
|
|
« Reply #12 on: August 28, 2012, 10:48:55 pm » |
|
You should change your title from "A Rant" to "A Rat."
|
|
|
|
|
Logged
|
A lot of stuff.
|
|
|
|
Jacko1070
|
|
« Reply #13 on: August 29, 2012, 10:59:30 am » |
|
Unfortunately calling out someone who pulls an a**hole move doesn't effect them in the least, only exposes them to the rest of the world not to deal with them. Parts in this industry are getting harder and harder to come by so that's why I turned to this site as you all seem like a great bunch of guys (with a wealth of knowledge to boot) who are always willing to help out when you can. If there is a person who's pulling that kind of crap I would be happy to see them exposed as, quite frankly it's not the kind of person I would want to do business with. If they are willing to screw someone for a couple of parts, I can only imagine what goes on when a full machine is on the line...........just my thoughts
|
|
|
|
|
Logged
|
|
|
|
|
Blind1968
|
|
« Reply #14 on: August 29, 2012, 11:16:00 am » |
|
Unfortunately calling out someone who pulls an a**hole move doesn't effect them in the least, only exposes them to the rest of the world not to deal with them. Parts in this industry are getting harder and harder to come by so that's why I turned to this site as you all seem like a great bunch of guys (with a wealth of knowledge to boot) who are always willing to help out when you can. If there is a person who's pulling that kind of crap I would be happy to see them exposed as, quite frankly it's not the kind of person I would want to do business with. If they are willing to screw someone for a couple of parts, I can only imagine what goes on when a full machine is on the line...........just my thoughts
Where's the "like" button on this post... Well said Jacko1070! |
|
|
|
« Last Edit: August 30, 2012, 08:17:30 am by Blind1968 »
|
Logged
|
~ Bryan
|
|
|
|
Pat Pixley
Guest
|
|
« Reply #15 on: August 29, 2012, 10:32:16 pm » |
|
Well I know this person will or has seen this by now and I'm sure they got a laugh or will , because they are thing they got something for free. well in all honesty you cost the chromer money you cost me my time in getting this out to my customer ( and I will let my customer know who did this ) and he will spread the word .  So I will be the better person and wont put his name out there . |
|
|
|
|
Logged
|
|
|
|
|
Fire708
|
|
« Reply #16 on: August 30, 2012, 11:23:52 pm » |
|
It's really sad people will do something like this knowing full well they are stealing and lying. I believe karma will prevail in the end.
My hats off to Pat for being a better man and showing restraint.
|
|
|
|
|
Logged
|
|
|
|
|
