How to wire up new top fan motor on my C-51

[lonchaneyjr]

you don't have to but it's easier if you take the belt off. rudy

[oldcoke]

Thanks, also, when you install the fan blade, does the screw go in front of the blade facing the front of the machine or do you have to reach over the blade to reach the screw on the blade? Just want to make sure I install the blade right. 

[lonchaneyjr]

in front of the blade facing the front of the machine. rudy

[johnieG]

Thanks, also, when you install the fan blade, does the screw go in front of the blade facing the front of the machine or do you have to reach over the blade to reach the screw on the blade? Just want to make sure I install the blade right. 

for those of you who may have an original C51 evaporator fan with the three blades, remember that the retaining screw on the end of the original shaft is a left-hand thread....(counter-clockwise to tighten & clock-wise to remove it)

[Yarochrehc]

Common motor, a lot of refrigeration parts companys, Grainger Co. have them.