oldcoke
5 Cent Member
 Offline
Posts: 66
|
 |
« on: August 19, 2010, 10:07:00 am » |
|
When I got this Coke machine (C-51) it had no top fan. But the coke machine ran great and kept the cokes cold. Now I am going to order a new fan motor and blade but do not see how to wire it up. All the wires going up to where the fan goes are not for the fan? Will the fan come with the wire to hook up somewhere on the machine?  |
|
|
|
|
Logged
|
|
|
|
|
collecture
|
|
« Reply #1 on: August 19, 2010, 10:31:17 am » |
|
It should - are you getting the fan from one of the major suppliers?
The fan is supposed to run continuously, so it is hard-wired in the the wiring harness.
|
|
|
|
|
Logged
|
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
|
|
|
lonchaneyjr
Newbie
Offline
Posts: 5
|
|
« Reply #2 on: August 19, 2010, 05:08:19 pm » |
|
got mine from FUN_TRONICS. it has two wires. wired one to hot/black wire and the other to neutral/white wire of the power cord. didn't seem to matter which wire was wired to the hot or neutral as it is working great. since i am new at this someone may have a better idea. hope this helps. rudy
|
|
|
|
|
Logged
|
|
|
|
|
loman4ec
|
|
« Reply #3 on: August 20, 2010, 10:02:09 am » |
|
I may be wrong but I don't think the fan motor for the 51 is reproduced. I know it uses a different motor than other machines.
|
|
|
|
|
Logged
|
|
|
|
|
collecture
|
|
« Reply #4 on: August 20, 2010, 10:30:17 am » |
|
I may be wrong but I don't think the fan motor for the 51 is reproduced. I know it uses a different motor than other machines.
Fun-Tronics sells two versions: http://www.fun-tronicsllc.com/store.php?crn=302&rn=613&action=show_detailhttp://www.fun-tronicsllc.com/store.php?crn=302&rn=612&action=show_detail |
|
|
|
|
Logged
|
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
|
|
|
|
loman4ec
|
|
« Reply #5 on: August 20, 2010, 10:41:10 am » |
|
I was not aware of that! Thank you Tom. I didn't know it was remade.
|
|
|
|
|
Logged
|
|
|
|
oldcoke
5 Cent Member
Offline
Posts: 66
|
|
« Reply #6 on: August 21, 2010, 04:01:29 pm » |
|
Thanks for all the replays. I will be getting mine from Fun-Tronics. I am not ready for it at this time but will order when machine is done. Thanks again guys.
|
|
|
|
|
Logged
|
|
|
|
oldcoke
5 Cent Member
Offline
Posts: 66
|
|
« Reply #7 on: August 21, 2010, 04:11:05 pm » |
|
I am not sure which one I will need?? I have four small holes and one bigger hole in front where the motor goes for the fan blade and also three tabs on the outside. One at the top and one on each side on the back. Which one do I need? Also, does the blade where you tighen the screw go facing the front of the machine or to the rear? Thanks |
|
|
|
« Last Edit: August 21, 2010, 04:18:18 pm by oldcoke »
|
Logged
|
|
|
|
lonchaneyjr
Newbie
Offline
Posts: 5
|
|
« Reply #8 on: August 21, 2010, 05:29:36 pm » |
|
if you order from fun-tronics you will need part # 11C-1.the fan blade is part # 13C. I did not need to use the three tabs in the back. the blade will face the front of the machine when placing the screw. rudy.
|
|
|
|
|
Logged
|
|
|
|
oldcoke
5 Cent Member
Offline
Posts: 66
|
|
« Reply #9 on: August 22, 2010, 08:16:24 am » |
|
Thanks, did you have to take off the coke belt to get to the screw on the fan blade?
|
|
|
|
« Last Edit: August 22, 2010, 08:18:21 am by oldcoke »
|
Logged
|
|
|
|
lonchaneyjr
Newbie
Offline
Posts: 5
|
|
« Reply #10 on: August 22, 2010, 09:52:35 am » |
|
you don't have to but it's easier if you take the belt off. rudy
|
|
|
|
|
Logged
|
|
|
|
oldcoke
5 Cent Member
Offline
Posts: 66
|
|
« Reply #11 on: August 22, 2010, 10:17:57 pm » |
|
Thanks, also, when you install the fan blade, does the screw go in front of the blade facing the front of the machine or do you have to reach over the blade to reach the screw on the blade? Just want to make sure I install the blade right.
|
|
|
|
|
Logged
|
|
|
|
lonchaneyjr
Newbie
Offline
Posts: 5
|
|
« Reply #12 on: August 23, 2010, 01:09:21 pm » |
|
in front of the blade facing the front of the machine. rudy
|
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #13 on: August 23, 2010, 07:57:14 pm » |
|
Thanks, also, when you install the fan blade, does the screw go in front of the blade facing the front of the machine or do you have to reach over the blade to reach the screw on the blade? Just want to make sure I install the blade right.
for those of you who may have an original C51 evaporator fan with the three blades, remember that the retaining screw on the end of the original shaft is a left-hand thread....(counter-clockwise to tighten & clock-wise to remove it) |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Yarochrehc
|
|
« Reply #14 on: August 23, 2010, 08:14:07 pm » |
|
Common motor, a lot of refrigeration parts companys, Grainger Co. have them.
|
|
|
|
|
Logged
|
Bob
Restored
Vendo H63B Coke in use in basement
Original
Vendo V/VF63/7 Pepsi in use
Restoring: Glascock Standard
(2) Vendo 63
(2)Vendo 90
Vendo 126 waiting for paint
VMC 56
Westinghouse WE-6
|
|
|
|
