SMC Discussion Areas
November 23, 2024, 11:40:15 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Seeburg C question  (Read 4315 times)
0 Members and 1 Guest are viewing this topic.
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768



« on: March 13, 2010, 09:39:02 pm »

Anyone good with Jukeboxes? I have another Seeburg C that I am going to work on but I need advice on the record mech. My juke powers up and takes credits but once a selection is made the mech does not move to go get the record. After selecting the song it does nothing. This is a wonderfully complete and clean Juke. I am going to sell it but I would like to have it working first. Any suggestions? 
« Last Edit: March 14, 2010, 09:34:49 am by johnieG » Logged
Eric
Soda Jerks
*****
Offline Offline

Posts: 4860



« Reply #1 on: March 13, 2010, 11:14:42 pm »

TomfromJersey and Neil would know....
« Last Edit: March 14, 2010, 01:01:21 pm by Eric » Logged

Eric

WANTED:
Embossed Quikold Standard
MCarter
Soda Jerks
*****
Offline Offline

Posts: 1143



« Reply #2 on: March 13, 2010, 11:32:48 pm »

Mine does that every once in awhile. The pinbank might be dirty.
Logged

Matt



RC VMC - 81 Orignal
Vendo V-56 Two Tone Round Top ~~ Currently in use
Seeburg 100 G Jukebox ~~ Restored
Minit Pop Popcorn Machine ~~ Restored
Cavalier 55-D ~~ Restored
Rockola 1426 ~~ Orignal--- For Sale
Chicago Coin Band Box ~~~ Restored
Jim
Administrator
Soda Jerks
*****
Offline Offline

Posts: 5880


#1 Soda Jerk!


WWW
« Reply #3 on: March 14, 2010, 08:51:28 am »

I'll bet some of the contacts in the selection cycle are dirty...
Just for kicks and giggles, locate the motor/carriage switches and see if you can operate the carriage manually... There are two switches for the "C", on the left side below the support bracket. The switch towards the back controls motor function and should be set towards the back, if this switch is forward, the carriage will not move under normal conditions. The other momentary switch, scan, will move the carriage back and forth as necessary to load records or just service operations. If the carriage moves manually, I would suspect dirty contacts somewhere in the cycle...

Josh, do the selection buttons latch properly?
And after the letter/number selection is made, do they reset?
Logged

My six cents,

Jim

TomFromJersey
Soda Jerks
*****
Offline Offline

Posts: 648



« Reply #4 on: March 14, 2010, 09:30:55 am »

Josh
  Without looking at the machine. The first thing to check if the mech isn't cycling is to make sure the 4 mech hold down bolts are backed all the way out, if they are cranked down, it won't cycle.
  Tom
Logged

Grapette Quickold Standard
AMI I200 AMI H200
Wurlitzer 61, 600, 700, 750, 800, 1080, 2100
Packard Musical Bar
Chicago Coin BandBox
15 remote speakers and counting
A bunch of Grapette stuff
Some really cool vending machines
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768



« Reply #5 on: March 14, 2010, 02:54:19 pm »

Thanks for the help. I got it to work. It was the switch. It now selects and picks up the records just fine. You can faintly hear the music and all of the tubes light up but not much sound. I am sure it needs an amp rebuild. I will be selling it soon. It's a really nice solid juke.
Logged
Kilroy
Soda Jerks
*****
Offline Offline

Posts: 4278



WWW
« Reply #6 on: March 14, 2010, 02:55:56 pm »

I'd defiantely do an amp and receiver rebuild. If you are comfortable soldering, and reading a schematic, it's not difficult. If not, you can shop it out. But after 60 years,  it's almost a requirememnt
Logged

"Restored they go for $6-7,000!!"
Member : Michigan Mafia
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!