SMC Discussion Areas
September 13, 2024, 02:18:23 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: Wc 102 md green light behind coke sign burn out instantly  (Read 6435 times)
0 Members and 5 Guests are viewing this topic.
Ironsoul
Guest
« on: March 16, 2008, 12:10:24 am »

Hey I have a wc 102md and the light for the signs bulbs burn out as soon as I turn it on?! Also the cooliibg unit seems to kick on but doesn't cool very well.. Any help would be great!! Thanks so much!
-nathan
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6225



« Reply #1 on: March 16, 2008, 10:27:30 am »

      A bad ballast will burnout a brand new florecent tube.

      Checking through past refrigeration discussions on this post will greatly  help
you analyze the cooling problem.
Logged

Glen
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5395


This is fine...everythings going to be OK....


WWW
« Reply #2 on: March 16, 2008, 04:39:09 pm »

Yes, I agree with moondawg, you've got a shorted out ballast in the light fixture, & I believe the 102 has two tubes?
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Ironsoul
Guest
« Reply #3 on: March 16, 2008, 04:47:27 pm »

yea it has two tubes, it's the green sign version i just got it a few days ago i have been really excited! and i am glad i found this website! thanks so much for help!

i took a photo of the machine, i can't seem to find to much information about it. is it a undesirable machine? i like it
« Last Edit: March 16, 2008, 05:12:21 pm by Ironsoul » Logged
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 4938


« Reply #4 on: March 16, 2008, 06:50:11 pm »

Welcome to the board!! Plenty of help here just ask. You like it that is the important thing. A big machine won't sell as fast as the smaller versions but for a home party machine these can't be beat. Bunch of selections and no need to reload every hour or two.
Creighton
Logged
Pat Pixley
Guest
« Reply #5 on: March 16, 2008, 07:55:27 pm »

yes welcome to the site ,There are a lot of great people hereto help you out.
 And Creighton right as long as you like it thats all that counts.

And i will third that check the refrigeration area this may help you out ,
also dont be shy to ask questions smile.
Logged
Ironsoul
Guest
« Reply #6 on: March 16, 2008, 08:44:14 pm »

Thanks guys! i  think i figured out whats wrong i took the top cooler thing off and the fan doesn't spin at all. what kind of motor is that? and can i replace it? the lower fan and compressor runs for like 30 and hours and then shuts off, but its not hot or anything slightly warm maybe but not bad and the condenser coils get nice and cold so you think thats the problem? thanks guys!

Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #7 on: March 16, 2008, 11:44:00 pm »

That fan type, where the whole front half of the fan turns, is used on Westinghouse machines almost exclusively. Westinghouse did most of their stuff (in house) whereas Vendo and Cavalier had various suppliers.
No replacement that I know of.
You will have to make some modifications to the mount.
Somebody here did this and posted pics - MCarter? BrianB? 90grad?
I can't quite remember
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
90grad
Soda Jerks
*****
Offline Offline

Posts: 1245


Thanks to all our veterans for our freedom!


« Reply #8 on: March 17, 2008, 05:37:53 am »

Tom,

Yep, that was me.  There is a thread on it located here...

http://soda-machines.com/component/option,com_smf/Itemid,29/topic,7252.0/

It's not too hard to do and I recommend using the smaller fan blade, so the clearance isn't so critical.  Also, don't run your machine until you get the top fan fixed.  While you are at it, you may want to replace the lower fan, too.  Get another motor, but you'll have to buy a new mounting bracket and blade.  Get what's called a foot-mount.  This attaches to the bottom of the newer fan motors.  Funtronics or Soda Jerk Works sells all this stuff.
« Last Edit: March 17, 2008, 05:46:40 am by 90grad » Logged

Wayne

Mid-Atlantic Chapter

Cavalier 51 (1953)
Cavalier Airline Cooler
7-Up Picnic Cooler
Vendo 110 (1957)
VMC 56 Bottle (1964)
VMC 56 Can
Westinghouse Master Water Bath Cooler
Westinghouse Standard Ice Cooler
Westinghouse WB-102 (1963)
Bob K
Soda Jerks
*****
Offline Offline

Posts: 803



« Reply #9 on: March 26, 2008, 06:52:35 am »

Nice machine, Ironsoul.  Love those MD's!  drinking

Bob

p.s. your exact machine is pictured in the old magazine ad in my avatar.  Let me know if you want me to email you a copy.
« Last Edit: March 26, 2008, 06:56:17 am by Bob K » Logged
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!