Cavalier 55D Bingo!

[TheGarbageHunter]

Just picked this machine up 10minutes from my home. Machine looks complete but I am not 100% sure since I have never owned one before or seen one in person. It came with 15 small spacers, 2 long back spacers, and a mech full of nickles. It has a light up panel and the ID tag reads 55D. Any idea how I need to assemble the inside so it can start vending POP, Bottles or Cans??

Thanks
Fresco

[TheGarbageHunter]

Pics

[TheGarbageHunter]

Pic

[TheGarbageHunter]

Pic

[Ltransam]

Way to GO !!! Fresco

                 Great Score    There are 2 long spacers abought 3ft they mount in the rear . The other are probley the Bottles + Can Spacers I mention in the other post . I hpe that only a Sticker oner the Plastic Pannel   & If so becareful removeing it . I have used a Hair dryer on LOW taking my time If you cant just pull it off ? . If you look at the door liner on the inside It Should tell you were & How to install the spacers .Post Pictures of the In side .

                                                           Leonard

[Ltransam]

OPPS !!!! 
              And typeing don't mix    Sorry what I was Trying to say was Is That A sticker on the light -up . But I see you posted More Pictures & That it looks like a Plastic sign

                                                            Leonard

[BrianB]

The spacer(s) location all depends on what size bottles you are going to vend. I noticed from your pictures that the bottle loading instructions have been removed from the main door liner.

If you are going to use 10 or 12 oz. bottles, no sweat. The spacers can be set up for those no problem. If you plan on vending the small 8 oz Coke bottles, that's another story. You will have to add a few additional left/right spacers to make up for the smaller diameter bottle that Coke is using now.

For 10oz & 12oz bottles, set the back spacer in the rear notch. If for some reason there is a lto of slop from front to back you can move the spacer forward a notch it goes in 3/8" increments. You should have approx. 1/4" of clearance over the entire length of the bottle.

For 10oz bottles you will most likely have to use a left & right side spacer. For 12oz bottles you more than likely won't have to use a spacer. I experimented with mine to find out the best side spacer combinations.

If you PM MCarter, he might be able to help you with some side spacers if you need them.

[sodaworks]

They reproduce the light up panel. To vend cans I had to play with the spacers to get the right combination on the 55D I restored a few months back. Victor if you don't get it let me know and I'll get the info. when I can.

[TheGarbageHunter]

Thanks for the tips Guys!

I have not had time to play with it yet but based on what I have read and your info looks to be complete, keys and the compressor is extremly quit!. In my Small 2 years of buying machines, this is the first 55 Cav I have come accross in the BayArea. And for 150.00, I think it was a great buy!

 

[Pat Pixley]

Hey Fresco ,Looks like you got one heck of a deal and it look really
good just have to get those Pepsi signs off.

Pat