SMC Discussion Areas
March 29, 2024, 08:38:13 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: 1 [2]  All   Go Down
  Print  
Author Topic: Vendo v192-6 won't vend  (Read 24132 times)
0 Members and 1 Guest are viewing this topic.
BrianB
Soda Jerks
*****
Offline Offline

Posts: 2215



« Reply #10 on: March 11, 2005, 06:49:21 am »

Hmmm.....sounds like it "wants" to vend. I'm not sure on that model if there is a direct way to actuate/cycle the vend motors like you can on old Choice Vends. I'm thinking there is but not 100% sure.

Guy's/Gal's, what do you think?
Logged

Brian
Guest
« Reply #11 on: March 11, 2005, 01:34:55 pm »

I have tested each vend solenoid with a std. plug with ends cut off - 120v.  Every one of them fired.  Is this sound evidence that each one is work properly?  Perhaps a broken/loose wire conn. is not allowing power to the solenoid.  Or maybe a cancel switch is stuck closed...any ideas?!?
Logged
khentige
Newbie
*
Offline Offline

Posts: 12


« Reply #12 on: January 08, 2017, 10:10:40 am »

i know this is an old thread but maybe this can help the next guy (or gal),

So in the above scenario the free play switch is activating the 1st relay in the circuit because you have paid. in order for the select switch to activate the selected slot motor, all motors have to be installed as the 115VAC goes through all of the motors relay switches in series and then back to the 2nd relay, awaiting you to make a selection.

just my 2cents. Good luck.

Ek in CT
Logged
Pages: 1 [2]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!