SMC Discussion Areas
March 28, 2024, 12:05:31 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Drilling out an ACE Lock  (Read 9320 times)
0 Members and 1 Guest are viewing this topic.
BryanH
Soda Jerks
*****
Offline Offline

Posts: 1356


Sweatin' in Arizona... but it's a dry heat!


WWW
« on: April 01, 2007, 01:35:57 pm »

I was just given a ChoiceVend VUB/C 9-81 machine.  No idea what works and what doesn't as it's locked without a key.

Is there any tricks, tips or techniques for drilling these locks out?




Logged

Thanks, Bryan
   Cavalier USS-96: unrestored, working on the back patio
   CV VUB/C 8-91: a fantasy restoration?
   GE Cooler: in pieces, my next project
Seven181
Soda Jerks
*****
Offline Offline

Posts: 1868



« Reply #1 on: April 01, 2007, 02:06:41 pm »

Bryan,

I have had two selectivends. When I drilled out my lock, I just took a medium size bit and drilled it straight out. Mine cracked and I pulled it right out. Maybe this was me, but seemed easy. Other guys might have a better suggestion. What kind of selectivend? Good shape or need work?

Brian
Logged

Brian  happydrinkers
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #2 on: April 01, 2007, 05:50:19 pm »

For a regular slot key lock, just drill.
If it is an ACE lock, I'd make a dimple with a punch.
That way the bit won't accidentally run off and gouge the body.
A 1/4" bit should work. You shouldn't need to drill too far - 3/4".
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
BryanH
Soda Jerks
*****
Offline Offline

Posts: 1356


Sweatin' in Arizona... but it's a dry heat!


WWW
« Reply #3 on: April 01, 2007, 08:26:45 pm »

Thanks guys - got the drill out and drilled out the center core.  Went about 3/8 - 1/2 deep.  Can't figure out how to get the core to turn so the handle pops out.  Do I just keep drilling until it pops out?

Apparently yes... I went back and drilled another 1/4" or so and the lock popped.




Logged

Thanks, Bryan
   Cavalier USS-96: unrestored, working on the back patio
   CV VUB/C 8-91: a fantasy restoration?
   GE Cooler: in pieces, my next project
halehouse
Soda Jerks
*****
Offline Offline

Posts: 2421



« Reply #4 on: June 29, 2007, 03:14:59 pm »

Why doesn't this seem to be easy for me?  I am trying to drill out a regular key lock on a candy machine and the bit just jams.  I should just be able to drill down through the center, right?
Logged

Vendo 63 Stylestar (Restored)
Glascock Standard
Cornelius 50 Slider (Restored)
Marvin
Soda Jerks
*****
Offline Offline

Posts: 683


« Reply #5 on: June 29, 2007, 11:10:57 pm »

A locksmith friend got me one of these for those type locks.  It works great.
http://www.lockpicks.com/index.asp?PageAction=VIEWPROD&ProdID=93

Marvin
Logged
halehouse
Soda Jerks
*****
Offline Offline

Posts: 2421



« Reply #6 on: June 30, 2007, 07:37:27 am »

I saw that.  But I don't think I need that for this type of lock.  (see LK003 on the link)

This is the type of lock I need
Logged

Vendo 63 Stylestar (Restored)
Glascock Standard
Cornelius 50 Slider (Restored)
aspbear1
Guest
« Reply #7 on: June 30, 2007, 09:08:22 am »

Dan they do not always go real easy, especially on keyed locks.  I have broken a few drill bits doing these (well actually several). The key is to keep the drill going down the center of the lock.
Logged
halehouse
Soda Jerks
*****
Offline Offline

Posts: 2421



« Reply #8 on: June 30, 2007, 11:43:10 am »

Ok, got it with a titanium bit.  Thanks
Logged

Vendo 63 Stylestar (Restored)
Glascock Standard
Cornelius 50 Slider (Restored)
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!