Need help in identifying machine

[aspbear1]

Great picture....

[coke_and_stuff]

After looking at the picture again it appears to be a standard. They are fairly easy to obtain on the sign your best be would be to find a pepsi book and see if you can find one in there.

Joey

[ZMonet]

Thanks everyone.  Looks like a fun project ahead.

[MoonDawg]

Like Joey said, the cooler is the easiest to find.  You could
start on the sign today.  Someone here can give you a dimension.
       The Pepsi logo can be copied for transfer onto a metal sign and
the "Quality / Quantity" are standard letters so they are easy.
       The Westinghouse will have embossed letters so the sign will not lay flat.  May I suggest :  Since you are also trying to duplicate
the raised ridge around the outside of the sign, maybe weld some
metal tubing around the outside as a frame. This will also keep the metal level with the raised letters underneath.

       I think it would be fun to say " Here is the cooler in the picture"

[loman4ec]

Like you said the standard is a common machine. Just pound the embossing in with a hammer. That  is most likely what Pepsi did. You could even cut the embossing out and weld in a flat piece and then you wouldn't even need a sign. You would have a generic westinghouse standard. Just have the vinyl Pepsi sign made.

[sodaworks]

Awesome picture!! That would be too cool to display!!

[Eric]

Hmmm.... bet you could find a Pepsi cooler like a GE master
double dot and paint it up they were about the same size
as a standard/master....
Actually there's one on eBay now up North..

[ZMonet]

Thanks for all the ideas and great response to the family picture.  I appreciate it.

[ZMonet]

Would this be the machine?  How often do these come around?  Doesn't look like this has the lids.

LINK

[MoonDawg]

That is exactly what you are looking for, priced right too.