SMC Discussion Areas
April 27, 2024, 04:00:37 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: 7-Up Cooler  (Read 8863 times)
0 Members and 1 Guest are viewing this topic.
90grad
Soda Jerks
*****
Offline Offline

Posts: 1245


Thanks to all our veterans for our freedom!


« on: December 26, 2006, 04:51:25 pm »

All,

I picked up the 7-up carry cooler (see thread below this one entitled "Help!" for photos).  Anyway, it's in really good shape except for one thing.  Some one brush painted over the white.  The brushed paint is flaking off and the paint underneath looks good.  What, if anything, can I use to remove the brushed paint?  I think if I do, it will look really good.
Logged

Wayne

Mid-Atlantic Chapter

Cavalier 51 (1953)
Cavalier Airline Cooler
7-Up Picnic Cooler
Vendo 110 (1957)
VMC 56 Bottle (1964)
VMC 56 Can
Westinghouse Master Water Bath Cooler
Westinghouse Standard Ice Cooler
Westinghouse WB-102 (1963)
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 4938


« Reply #1 on: December 26, 2006, 05:14:46 pm »

I'd try hot soapy water first then Mineral spirits (paint thinner). Next woul be Lacquer Thinner. Thats what worked on the postage stamp machine. Go slow and check a test spot. It will take the good paint off as well. There also is Aircraft Coating Remover but it is nasty stuff.
Creighton
Logged
aspbear1
Guest
« Reply #2 on: December 26, 2006, 05:58:39 pm »

I am with Creighton.  I have used Acetone to take off the paint over on the edges of thermometers  but you have to work carefully....
Logged
Kilroy
Soda Jerks
*****
Offline Offline

Posts: 4278



WWW
« Reply #3 on: December 26, 2006, 05:59:20 pm »

I agree with Creighton I've had luck with using mineral spirits (take your time it is not an afternoon job), but would be afraid the coating removal would also remove the original paint.
Logged

"Restored they go for $6-7,000!!"
Member : Michigan Mafia
90grad
Soda Jerks
*****
Offline Offline

Posts: 1245


Thanks to all our veterans for our freedom!


« Reply #4 on: December 26, 2006, 06:04:59 pm »

Thanks, guys.  Dumb question, but do you just use a rag with the Mineral Spirits on it and start rubbing, or is there a technique?  I really don't wanna hurt the original finish.
Logged

Wayne

Mid-Atlantic Chapter

Cavalier 51 (1953)
Cavalier Airline Cooler
7-Up Picnic Cooler
Vendo 110 (1957)
VMC 56 Bottle (1964)
VMC 56 Can
Westinghouse Master Water Bath Cooler
Westinghouse Standard Ice Cooler
Westinghouse WB-102 (1963)
Creighton
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 4938


« Reply #5 on: December 26, 2006, 06:50:15 pm »

You want to get all the dirt/oil etc off first. Hot water and a small amount of dishwashing soap. Rinse and dry. I use paper towels to get the worst off then rinse with water and start using cotten towels (old t-shirts work). Turn towel often to keep from rubbing old paint into the good.
Creighton
Logged
rogerz
Guest
« Reply #6 on: December 26, 2006, 10:29:19 pm »

The aircraft remover will strip it to bare metal.

rz
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!