SMC Discussion Areas
November 23, 2024, 01:25:19 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Vmc 56 t-stat type  (Read 4563 times)
0 Members and 1 Guest are viewing this topic.
90grad
Soda Jerks
*****
Offline Offline

Posts: 1245


Thanks to all our veterans for our freedom!


« on: June 15, 2006, 05:24:51 am »

All,

I'm getting the VMC 56 7-Up bottle machine going.  When I started it up last night (about 2/3 full of product), it quickly lowered the temperature.  Problem is, it kept on lowering it.  The stat never shut off the unit unless I turned it completely off.  The box was below 20 degrees.  I started thinking the stat probe is incorrectly placed.

For you other 56 owners out there, is this stat the type that has to be touching the evaporator or is it an air-sensing type.  There is not a long pigtail on it and there is a clip which holds it to the evaporator assembly (not the coils).  However, what gets clipped - the tip or is it just a clip to hold the thing in place?

The photo below shows the set-up on my other VMC 56.  However, this was the set-up before I started restoration and it's not been tried since.  Regardless, it shows a close up view similar to the 7-Up machine.

I have another stat which I can try tonight.  Ideas?'<img'>
Logged

Wayne

Mid-Atlantic Chapter

Cavalier 51 (1953)
Cavalier Airline Cooler
7-Up Picnic Cooler
Vendo 110 (1957)
VMC 56 Bottle (1964)
VMC 56 Can
Westinghouse Master Water Bath Cooler
Westinghouse Standard Ice Cooler
Westinghouse WB-102 (1963)
bubba
Soda Jerks
*****
Offline Offline

Posts: 3021



« Reply #1 on: June 15, 2006, 06:26:38 am »

Wayne... I'll have a look at mine tonite and see where the probe touching. I never really looked at it....
Logged

Ken

V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
Kevin C
Soda Jerks
*****
Offline Offline

Posts: 971



« Reply #2 on: June 15, 2006, 08:14:45 am »

Hello

The tip of the t-stat should be hanging in the air behind the upper evaporator coil. It should not be touching any metal.

Sounds like you need a new t-stat.

Kevin
Logged

Vendo 63-C   On the job
Vendo 56   Going back together
Vendo 56-C    Waiting for rehab!
Vendo 126  Rough outside but loaded & operational
Vendo 110  Under repair
Ideal 55 -  **For Sale make offer
Glasco 55 -  Waiting
Royal 650  On the job
Lance Snack Machine - On the job
BryanH
Soda Jerks
*****
Offline Offline

Posts: 1356


Sweatin' in Arizona... but it's a dry heat!


WWW
« Reply #3 on: June 15, 2006, 02:56:41 pm »

Like Kevin said..  On my machines there was a baffle on the back of the evap that directed the air towards the rack side of the cabinet.  The tstat was clipped to this baffle.
Logged

Thanks, Bryan
   Cavalier USS-96: unrestored, working on the back patio
   CV VUB/C 8-91: a fantasy restoration?
   GE Cooler: in pieces, my next project
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #4 on: June 15, 2006, 03:36:15 pm »

Put the end of the cap tube in a glass of ice. If this shuts the machine off, then clip it to different spots on the evaporator until you are happy.    If the T/S does not react to ice.......replace it.
Logged

Glen
BryanH
Soda Jerks
*****
Offline Offline

Posts: 1356


Sweatin' in Arizona... but it's a dry heat!


WWW
« Reply #5 on: June 15, 2006, 11:34:35 pm »

FYI - you can do the ice water trick even without the tstat or machine plugged in.  Set the tstat on the warmest setting then drop it in the water.  If you hear it click after going in the ice then it's working.  No click and it's toast.
Logged

Thanks, Bryan
   Cavalier USS-96: unrestored, working on the back patio
   CV VUB/C 8-91: a fantasy restoration?
   GE Cooler: in pieces, my next project
90grad
Soda Jerks
*****
Offline Offline

Posts: 1245


Thanks to all our veterans for our freedom!


« Reply #6 on: June 16, 2006, 04:50:30 am »

Update....  I think I have it.  The original stat was toast.  So, I stuck in another one I had and tried that.  Well, the compressor wouldn't even kick on.  So, I took that one out and took the cover off (couldn't believe I had 2 bad stats).  After cleaning out a mother load of dead spiders, that one worked.  The ice trick was successful (thanks Glen) and I am playing with the settings and location now to get it right.  Thanks to all.
Logged

Wayne

Mid-Atlantic Chapter

Cavalier 51 (1953)
Cavalier Airline Cooler
7-Up Picnic Cooler
Vendo 110 (1957)
VMC 56 Bottle (1964)
VMC 56 Can
Westinghouse Master Water Bath Cooler
Westinghouse Standard Ice Cooler
Westinghouse WB-102 (1963)
90grad
Soda Jerks
*****
Offline Offline

Posts: 1245


Thanks to all our veterans for our freedom!


« Reply #7 on: June 16, 2006, 05:02:16 pm »

I've got the stat set on 3 and the box (in my garage, which is a little warm) is coming on for 5-10 minutes and staying off for 15-20.  Does this sound about right?
Logged

Wayne

Mid-Atlantic Chapter

Cavalier 51 (1953)
Cavalier Airline Cooler
7-Up Picnic Cooler
Vendo 110 (1957)
VMC 56 Bottle (1964)
VMC 56 Can
Westinghouse Master Water Bath Cooler
Westinghouse Standard Ice Cooler
Westinghouse WB-102 (1963)
davethebirdman
Soda Jerks
*****
Offline Offline

Posts: 3162



« Reply #8 on: June 17, 2006, 01:12:25 am »

Wayne

that was about the cycle time my V-39 (If you recall) was running at in the end and I was happy. Glen stated anything over 10 mins was fine. Sounds like you had what I had. In the end I had three bad T-Stats before getting it right. Glad its now sorted out. Nothing worse than spending all day moving the probe around trying to get the best spot.

Dave
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!