This what i have to work with

[firemun]

Jasmine,
If you are sure those lids won't work...I will bid on them, I need them for a WD 20...which is what the seller claims they are off of.

As a side note, check this place for rust inhibtor, this stuff rocks...!


Rustbullet

jeff

[Eric]

Check www.eastwood.com they may have that rust paint you're looking for.

Eric

[BrianB]

Jasmine -

The company/website that Eric suggested is awesome. I have benn using Eastwood products for about a year now and have only good things to say about them.

Right now the two leading "rust inhibitors" on the market are POR 15 and Rust Encapsulator. Eastwood's product (Rust Encapsulator) has been proven scientifically superior to POR 15 and is available in aerosol as well as a brush on application.

Unlike the rust inhibitors bought at Lowes and local hardware stores, Rust Encapsulator actually chemically bonds with rust and isolates it from everything else. The hardware bought stuff attempts to "convert" the rust into an inert substance but rarely gets it all which leads to covered up rust pockets that will eat the heck out of any reaming good metal.

I've used it, and really like it. Just follow the instructions on the can and you should be good to go!. Hope this helps.

[firemun]

Quote (VMC117BMB @ Aug. 25 2005,7:58)

Jasmine - Right now the two leading "rust inhibitors" on the market are POR 15 and Rust Encapsulator.

Not that I am promoting the product, but rustbullet usually outperforms por15 in independent tests...so don't overlook it.  I have used both over the years and rustbullet has done better than any other I have ever used.  

jeff

[90grad]

Do you guys think that stuff could be used on a compressor?

[jasmine64]

Quote

f you are sure those lids won't work...I will bid on them, I need them for a WD 20...which is what the seller claims they are off of.

They wont work with my machine. Wish they did.

Thanks guys I'm going to check out the stuff you advised.

[txturbo]

POR-15 will work on anything.My lids are in about the same condition. I'll just knock the loose stuff off and paint with POR-15,prime and paint.

[jasmine64]

I got to look at the website for a few minutes on the products, (got sidetracked when my Journey greatest hits dvd of concert and music videos came in,)   '>

Just had to watch all 18.

I do plan on using one of the products not sure which one yet.
Any one I guess will do what I need. Thanks for the web sites guys.

[BrianB]

I think it's great to hear that different people have had good results with different products.

At least it'll make it easier when it comes to having a selection! Not having to worry about one product that works and the manufacturer finding this out and jacking up the price is a good thing too. Never heard of "Rust Bullet" though, where is it available?

Wayne - I've used it on compressors before with no problems. As always, try to get all of the loose rust and scale off before spraying. I can't speak for all of these products (except the ones I've used) but they work well as a "final" primer coat before painting with gloss black. So instead of spraying the rust killer then spraying a coat of gray primer, just spray the rust killer THEN the topcoat.

[jasmine64]

my hubby's welding the new metal on for me.
So I can bondo the top of the lids and sand it for the last time I hope.

I'll get the rusted places finished tomorrow,
stripping the paint, prep for repainting the lids.

I have a pic of the wiring , I took the clip off and got a
good look at the stuff behind that cap.
Let me know if anyone sees anything I should be worried about.

May have to send it to Eric (Global Compressor) and let him take care of the cooling unit.
With this katrina stuff, I may have to place my machine on the back burner
Hope to have it done by the first of the year instead of Nov.