SMC Discussion Areas
March 28, 2024, 03:58:59 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: 1970's pepsi machine  (Read 19108 times)
0 Members and 1 Guest are viewing this topic.
james woz
Guest
« on: July 20, 2005, 01:32:37 pm »

I have a 1970's pepsi machine with 5 soda selections (choice vend). One of the selections when a coin is dropped in the wheel (auger) keeps turning and dispenses out all the soda's. one other selection when coin is dropped in wheel only turns a little bit and needs more coins to get soda to drop. Is there any ajustment for wheel rotation? Or is some part broke. (See image of soda machine)



Logged
dr galaga
Soda Jerks
*****
Offline Offline

Posts: 2345


Sorry, but it's a POP MACHINE!


WWW
« Reply #1 on: July 20, 2005, 02:23:00 pm »

Welcome aboard James.  
Do you have a picture of the vending mechanism?  It may help the people here see what you have better.
Logged

Brent
--------------
Cavalier CS-80C
Vendo 63
--------------
The ultimate glass bottle soda site: www.GlassBottleSoda.org
My gameroom: Arcade80s.net
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 1036



« Reply #2 on: July 20, 2005, 02:54:32 pm »

My choice vend does the same thing.
Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
Kevin C
Soda Jerks
*****
Offline Offline

Posts: 971



« Reply #3 on: July 20, 2005, 03:04:58 pm »

Hey

Just an idea

Use the multi drop selection only when you first start your party & then only use the two coin selection when you are ready for your guests to leave.

Kevin
Logged

Vendo 63-C   On the job
Vendo 56   Going back together
Vendo 56-C    Waiting for rehab!
Vendo 126  Rough outside but loaded & operational
Vendo 110  Under repair
Ideal 55 -  **For Sale make offer
Glasco 55 -  Waiting
Royal 650  On the job
Lance Snack Machine - On the job
Guest
« Reply #4 on: July 21, 2005, 08:31:14 pm »

Not real familiar with this type of machine... does it have vertical dividers that the cans stack into, or does it use some other sort of internal mechanism?  I know I've run into this problem with an older vendo, which has a motor that turns a cylinder in the stack, which vends the cans.  

In front of the motor, there's a two piece plastic cam.  By adjusting the cam, you open either two or four detents into the wheel.  That way, you could vend bottles (using two detents) or cans (four detents).  Vendo makes it easy, the cam parts are red in the back and white in the front.  To change all you need is a screwdriver.  (That's a great design - I currently have a Royal that uses plastic clips you snap out of the cam wheel to block detents, which really makes things a pain to switch back and forth)

Might be worth a look.  Otherwise, there's far wiser heads out there on these machines that may know some specifics I don't.
Logged
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 1036



« Reply #5 on: July 22, 2005, 08:46:03 am »

Choice vend is a tough one to find parts for.

They are no where to be found unless a machine is torn apart for the parts and placed on ebay.
Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
james woz
Guest
« Reply #6 on: July 25, 2005, 01:39:23 pm »

Attached are some more pic's to see auger's. these may help understand macine. Motors are behind augers.
Logged
Guest
« Reply #7 on: July 25, 2005, 09:51:21 pm »

One word - YIKES! I've seen several different mechanisms, but that one really has me stumped.  Jasmine is probably the best chance of an idea of a fix.  Good luck, it looks like a great machine and will be nice once you figure out what is probably a simple fix.  Hang in there, someone out there knows an answer! '<img'>
Logged
Jim
Administrator
Soda Jerks
*****
Offline Offline

Posts: 5868


#1 Soda Jerk!


WWW
« Reply #8 on: July 26, 2005, 06:48:59 am »

I know JohnieG is familiar with aligning the vending augers on Choice Vend machines...
I haven't searched for this topic but I'm sure something will pop up since this has been discussed...
Logged

My six cents,

Jim

johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #9 on: July 26, 2005, 07:33:21 am »

Yep! That's a typical mechanism failer for a ChoiceVend, what's happening with the column that vends continually, is you have either a broken index gear, or a defective/stuck index switch, the gear & switch is what sets the vending cycle on a ChoiceVend,

The augers can be adjusted to vend either 12oz. Cans or glass bottles (you didn't say which you are vending, I'm assuming Cans).
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!