SMC Discussion Areas
June 23, 2024, 12:14:17 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: question about Ideal 150 slider  (Read 7615 times)
0 Members and 1 Guest are viewing this topic.
scottransell
Newbie
*
Offline Offline

Posts: 11


« on: October 29, 2023, 10:05:49 am »

I have a Ideal Canadian slide 150 which I finally found a coin mech for it, the only issue is the coin mech that came with it looks to missing some parts, not sure if these are inter changeable or if this could be repaired or not? And who does these repairs. It is a Vendall Machines LTD R31203 coin mech. I have included picture's as well to show what I have, Any help would be appreciated, another question is can you find and buy another one, that will work and fit in the same slot, or are these hard to find as well?
« Last Edit: October 29, 2023, 06:12:44 pm by scottransell » Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: October 29, 2023, 08:13:05 pm »

if that's the slug rejector, what's the rest of the coinmech look like?
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Ltransam
Soda Jerks
*****
Offline Offline

Posts: 2724


« Reply #2 on: October 29, 2023, 08:52:13 pm »

So I’m going to assume that it’s an internal mounted in to the machine ? Did you even try and drop a coin threw it to see if it drops out correctly?
I”m not familiar with your style machine but there are similar working between the 35-55-And larger ideals but your may be a later 60s version machine
Logged

Glascock Counter Top
VMC 81 7Up
Vendo-110-81D-V-56 V-23
Jacobs Pepsi-56
Stoner Cookie &5 Pull Pastry& 180 Candy
Kelvinator FS-51(Canada)
Cavalier's C-55-E-C-55-D
Selmix Sprite
Selmix Pepsi on Draugh
scottransell
Newbie
*
Offline Offline

Posts: 11


« Reply #3 on: October 30, 2023, 08:33:49 am »

Sorry I posted more pictures of the coin mech, and yes I have tried putting a coin in it and it falls right through, straight down. also the hinge part doesn't stay together and falls back, so makes it hard to work at all. That is why I am asking if this can be replaced with something else as I am sure there is things missing off of this coin mech. as it just drops right through and doesn't slide over to drop into the slot on the bottom. where it should go. thanks for your reply, and I will try and give you the best description as possible.
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #4 on: October 31, 2023, 07:04:17 am »

It looks very similar to a Coinco 760 slug rejector for a S75-9800 series coinmech, although yours is a single price/quarters only rejector, a 760 unit may fit & while the 760 can also accept dimes & nickels, obviously you'd only be able to vend with a quarter. they are cheap & plentiful on the internet, might be worth a try, although you may need to buy an entire coinmech in order to utilize just the slug rejector from it...but I've seen bare rejectors for sale as well.


note that Yours is mounted "backwards" in the machine [front vs back] if you flip it so the coin chute faces to the left you'll see how very similar they are, the key is where the coin exits the rejectors bottom to fall into the vending disk to allow the flapper to be rotated when pulling out a bottle.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
scottransell
Newbie
*
Offline Offline

Posts: 11


« Reply #5 on: October 31, 2023, 09:42:31 am »

thanks for the help and I'll take a look at it and see if it will work for me. really appreciate the advice and help here and I'll keep you posted as to the outcome thanks
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!