SMC Discussion Areas
November 26, 2024, 10:01:09 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: 1 2 3 [4] 5 6   Go Down
  Print  
Author Topic: Vendorlator VMC 340  (Read 26695 times)
0 Members and 1 Guest are viewing this topic.
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #30 on: September 28, 2020, 03:16:39 pm »

I found the compressor plate. The serial number starts with J5P.

I would suppose that is a 1955 compressor?

The case serial number is 340-4XXX so I suppose this is the ~4,000 VMC 340 unit made in 1955.

And it's in my garage!

AND:

An 8 ounce coke bottle fits perfectly and disppenses properly!


Ok, now you only have to stock the other 339 bottles!  laugh




Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #31 on: September 28, 2020, 04:17:34 pm »

If you buy at the right time you should be able to fill that machine for around $400.    blush
Logged

Glen
FlaJunkie
Newbie
*
Offline Offline

Posts: 46



« Reply #32 on: September 28, 2020, 04:18:51 pm »

Ok, now you only have to stock the other 339 bottles!  laugh

Yup! After I do whatever it is I will do to it!

Look what I found in the back of the machine!


Logged
FlaJunkie
Newbie
*
Offline Offline

Posts: 46



« Reply #33 on: September 28, 2020, 04:31:24 pm »

If you buy at the right time you should be able to fill that machine for around $400.    blush

Nah, about $255 at Walmart! Per ounce it costs about 3 times as much as 16 ounce bottled coke.

It'd be even cheaper at Sams' if they had it.   happydrinkers

Logged
FlaJunkie
Newbie
*
Offline Offline

Posts: 46



« Reply #34 on: September 28, 2020, 06:44:26 pm »

I found some other data on grandamericajukebox about serial numbers and dates.

At first, I discounted it because my model wasn't there. But I went back and looked at the VMC 77.

My compressor baseplate is a  J 5 P and XXXX.

Hmm. J could be VMC 340 specific.
5 is probably 1955.
But P? If it's a month? K should be December.



Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #35 on: September 28, 2020, 07:29:39 pm »

Yup! After I do whatever it is I will do to it!

Look what I found in the back of the machine!




if you pull those old refillable bottles out, look at the bottoms, they should have a bottling plant ID & date on them... might help you get a time-line on your machines working past...
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
FlaJunkie
Newbie
*
Offline Offline

Posts: 46



« Reply #36 on: September 29, 2020, 09:53:23 am »

Is there a specific drain hole/pattern on this machine?

I assume it will produce a lot of effluent in my humid Florida garage.

Does a drain pan hold enough in terms of days/evaporation?

What are your experiences?
Logged
FlaJunkie
Newbie
*
Offline Offline

Posts: 46



« Reply #37 on: September 29, 2020, 10:08:07 am »

if you pull those old refillable bottles out, look at the bottoms, they should have a bottling plant ID & date on them... might help you get a time-line on your machines working past...

Good idea. From all the literature and pictures I can find, it has to be a 1955 model...or early 1956 at the very latest.

The series was described in the Billboard article I posted earlier from 1955.

The white tops were a new design phase in 1956.

My guess is the machine was made in 1955.

It's no telling when the bottles in it were made or their dates.
« Last Edit: September 29, 2020, 06:31:41 pm by FlaJunkie » Logged
FlaJunkie
Newbie
*
Offline Offline

Posts: 46



« Reply #38 on: October 01, 2020, 06:02:50 pm »

It is with a heavy heart that I announce...

I'm going to have to repaint this machine!

It's got tons of wear on it; It was in service from '55 to 2019!

It has external rust and extra orange paint, and corrosion. I cannot save the original finish. On top of that, there are many dings in it.

The insides need some TLC. Here goes...

Logged
FlaJunkie
Newbie
*
Offline Offline

Posts: 46



« Reply #39 on: October 21, 2020, 06:08:29 pm »

What types/kinds of metals are inside the 340?








Logged
Pages: 1 2 3 [4] 5 6   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!