johnieG
|
 |
« on: August 04, 2019, 09:02:01 PM » |
|
Just finishing up repairing a nice original VMC Faygo VF56, just bored so I thought I'd post some pictures, clean, rust free and straight, it's a nice example of an original machine, basically, it stopped cooling for the customer, found that the cooling system was undercharged due to a slow leak , aggravated by a condensing coil was blocked by a wall of dust/lint & pet-hair, so I power washed the lower compressor compartment ( filthy, hadn't been touch in decades ) replaced the main wiring harness ( dry-rotted), both the evap' & condenser fan motors, installed a system service valve on the low-side of the compressor, recovered what was left of the R12 & installed some poly conversion oil & added a leak stop treatment and converted it over to R134A, the compressor is in solid shape with a good current-draw, but not so the start-run relay assembly, so it also has a new 3-in-1 starter/booster,
I added a few newer options for the customer , a free play switch actuated by the coin-return lever, a LED bottle rack light to illuminate the bottles in the gates, repaired & made functional again the original EM coinmech & set it back to 10-cents, bonus was I found the original price label hiding behind a hand-written tag for 25-cents. Oh & I unplugged the condensate drain hose for the bottle compartment and installed a missing coin-door lock. & replaced the Faygo marque's lamp & installed a correct size florescent FS-5 starter so it can light the way to the Faygo red-pop (strawberry-cream soda for you out of townies)
All & all he should be pretty happy to get his machine back down into his family room & serving cold ones again. Not a complete restoration, but it's now a solid, functional refurbished machine.
|