SMC Discussion Areas
March 29, 2024, 10:19:00 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: 1 [2] 3  All   Go Down
  Print  
Author Topic: Vendo 81 D Not Vending  (Read 17428 times)
0 Members and 1 Guest are viewing this topic.
cokecolaman
Soda Jerks
*****
Offline Offline

Posts: 986



« Reply #10 on: March 09, 2018, 02:02:18 am »

 I would still want to see the linkage where it connects to the shaft of the coin mechanism...That’s where I’ve seen it backwards before
Logged

VMC Coke 88 (nice original)
VMC Pepsi 81
VMC Orange Crush 81
VMC Squirt 81
VMC Dr. Pepper 81
VMC RC 81
VMC 7up 81 st
Vendo 44 original
Jacobs 56 Pepsi
Cavalier 33
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6224



« Reply #11 on: March 09, 2018, 11:52:12 am »

        The 2 adjusting screws seem to be maxed out, leaving your throw to a minimum.
Logged

Glen
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2627


Jared


« Reply #12 on: March 10, 2018, 12:10:18 am »

        The 2 adjusting screws seem to be maxed out, leaving your throw to a minimum.

Yep!

Look at where the old mark is from the pan head of the screw!
Logged
HI-OCTANE
Newbie
*
Offline Offline

Posts: 28



« Reply #13 on: March 10, 2018, 05:14:26 am »

Those screw marks are where it was originally when I bought it , I have adjusted it up and down   , did not make any difference . 
Logged
HI-OCTANE
Newbie
*
Offline Offline

Posts: 28



« Reply #14 on: March 10, 2018, 05:19:06 am »

Logged
HI-OCTANE
Newbie
*
Offline Offline

Posts: 28



« Reply #15 on: March 10, 2018, 05:22:45 am »

Here's the linkage to the coin mechanism ,   
Logged
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2627


Jared


« Reply #16 on: March 10, 2018, 08:10:23 pm »

Here's the linkage to the coin mechanism ,   

I would take the stack out of the machine so you can look at the parts moving . 

Logged
HI-OCTANE
Newbie
*
Offline Offline

Posts: 28



« Reply #17 on: March 12, 2018, 08:00:40 pm »

Ok finally got the machine to vend right .  Just had to get the right adjustment .  This is my  real first machine ,   still learning   now I can order a few  parts and decals  from funtronics .

and get it looking good .   Thanks for all your help  guys   this is  a very good web site .   I will post a pictures  of the  81 D when I get all together .

Thanks again for all your help . Cool
Logged
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2627


Jared


« Reply #18 on: March 13, 2018, 08:48:31 pm »

What was the adjustment ?
Logged
HI-OCTANE
Newbie
*
Offline Offline

Posts: 28



« Reply #19 on: March 14, 2018, 05:49:36 am »



I adjusted this,  even tho the T lined up with the barrel  I guess it was still out of wac and not letting it turn all the way  to release the bottles .  seems to be working now 
Logged
Pages: 1 [2] 3  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!