Vendo 81 D Not Vending

[cokecolaman]

 I would still want to see the linkage where it connects to the shaft of the coin mechanism...That’s where I’ve seen it backwards before

[MoonDawg]

        The 2 adjusting screws seem to be maxed out, leaving your throw to a minimum.

[Slapshot42]

        The 2 adjusting screws seem to be maxed out, leaving your throw to a minimum.

Yep!

Look at where the old mark is from the pan head of the screw!

[HI-OCTANE]

Those screw marks are where it was originally when I bought it , I have adjusted it up and down   , did not make any difference . 

[HI-OCTANE]

[HI-OCTANE]

Here's the linkage to the coin mechanism ,   

[Slapshot42]

Here's the linkage to the coin mechanism ,   

I would take the stack out of the machine so you can look at the parts moving . 

[HI-OCTANE]

Ok finally got the machine to vend right .  Just had to get the right adjustment .  This is my  real first machine ,   still learning   now I can order a few  parts and decals  from funtronics .

and get it looking good .   Thanks for all your help  guys   this is  a very good web site .   I will post a pictures  of the  81 D when I get all together .

Thanks again for all your help .

[Slapshot42]

What was the adjustment ?

[HI-OCTANE]

I adjusted this,  even tho the T lined up with the barrel  I guess it was still out of wac and not letting it turn all the way  to release the bottles .  seems to be working now