SMC Discussion Areas
March 29, 2024, 10:50:41 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: Exact change light H63  (Read 7202 times)
0 Members and 1 Guest are viewing this topic.
flapjack1439
Newbie
*
Offline Offline

Posts: 24


« on: August 23, 2016, 10:34:04 pm »

I have an H63A. There seems to be a circular light around the coin slot that says "Exact change only". There is no change mech in the machine. Anyone know how to light it?
Logged
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2627


Jared


« Reply #1 on: August 24, 2016, 01:27:21 am »

If you plan to install a coin mechanism in the machine once the change tubes are filled it will go away. 
Logged
flapjack1439
Newbie
*
Offline Offline

Posts: 24


« Reply #2 on: August 24, 2016, 08:54:33 pm »

It's presently off. I want to light it. Are you familiar?
Logged
tkaz
Soda Jerks
*****
Offline Offline

Posts: 1900

tkaz


WWW
« Reply #3 on: August 24, 2016, 10:16:22 pm »

Do you have the machine working on free vend with a switch?  I'm thinking that a jumper from pin 1 to pin 7 on the jones socket might get it to work, but I'd need to test on my machine before I could recommend that.
Logged

flapjack1439
Newbie
*
Offline Offline

Posts: 24


« Reply #4 on: August 24, 2016, 10:35:18 pm »

No free vend. I use quarters. I take it the Jones socket is the plug in the coin mech area.
 Please let me know.
Logged
tkaz
Soda Jerks
*****
Offline Offline

Posts: 1900

tkaz


WWW
« Reply #5 on: August 24, 2016, 11:31:01 pm »

So there is a coin mechanism in the machine?  I am confused
Logged

Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2627


Jared


« Reply #6 on: August 25, 2016, 12:08:55 am »

No free vend. I use quarters. I take it the Jones socket is the plug in the coin mech area.
 Please let me know.

Yes it's 8 pins.  How are you feeding quarters without a coin mechanism?
Logged
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2627


Jared


« Reply #7 on: August 25, 2016, 04:26:23 pm »

I have an H63A. There seems to be a circular light around the coin slot that says "Exact change only". There is no change mech in the machine. Anyone know how to light it?

Fill the change tubes.  If there is no change in the tubes of the coin mechanism the "exact change " light will stay lit because the tubes are empty resulting in shorting you your change...
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #8 on: August 25, 2016, 07:42:52 pm »

If all you wish to do is light up the " use exact change only"  lamp, jumper the #2 & #5 sockets of the female "jones" plug,  assuming you will NOT be using a coinmech.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
flapjack1439
Newbie
*
Offline Offline

Posts: 24


« Reply #9 on: August 25, 2016, 10:34:25 pm »

Sorry for the confusion. There is a coin mech, it takes quarters only. It works fine. I do not have a free vend switch. There are no change tubes, it does not make change. Inside the mech area is a socket and harness with multiple connections (Jones Socket?) So I just jumper 2 and 5 and that will light the exact change light. Do you have a diagram or pic? Thanks
Logged
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!