vend cam cylinder bracket needed

[ld26]

thanks for the info on the spring, I'm gonna wait and see if anyone can verify if the bracket can be removed from the 110 stack, Joey did you get a chance to check?

thx

[coke_and_stuff]

Email sent with a pic.

Thanks!

[Ltransam]

Lonnie .

              Sorry for the delay!! And I hope Joey was a help also .  It took awhile to locate the parts . As it is the only set i could locate so for now ill have to hold on to them in case i need to do another conversation .

First pictures shows all the correct parts on the low side are mechanical  style .
On the Upper side shows the Electric solenoid style.

Second Pictures Shows the mounting bracket you need & the correct cylinder lever .

Third picture shows the back side & location of the the return gate spring its 6+ long .Also note the type release levers in the picture & the cut out area is different on your stack .

[ld26]

thanks Leonard! those pics should help me get it done, Joey came through with the bracket, appreciate all the help!