Old Sled Works

[Kilroy]

I remember it well also. 
And test patterns. I found a clean  copy I am going to blow up and frame .

[collecture]

The Stooges looked like they were off a DVD. They were all pretty clear, I got a kick out of one that the vertical hold was either failing or needing adjustment.  It's been a long time since I saw a TV with a picture that was "rolling".

Love the Stooges as does my oldest son and I too had forgotten about the vertical roll - funny!

We had a little get together in the park with some other families about the time the Coyotes were in the NHL playoffs last year. I set up a small 15" digital TV with rabbit ears and juiced it with a Sears Portable Power so we dads could watch the game. All the kids had never seen rabbit ears and it intrigued a few.

[halehouse]

Our tv was attached to an antenna that was outside, mounted to a pole that ran up the side of the house. We weren't able to adjust it from the inside of the house, so someone had to go outside and actually turn the pole manually from ground level. If we were watching one channel and wanted to switch to another, somebody would go outside and turn the pole while the other person stood inside at the window. The person inside would rap on the window when the picture was "good".  We also lived very close to an Ohio Turnpike plaza, so our tv would often pick up conversation from the truckers' CB radios.

[Larry]

We were so poor we just set up a couple of crates to sit on and look out the window. When we wanted to change channels we went to look out the back windows. 

[sledworks]

Hi Jim:

Thanks for coming by. I'll have to check out my Philco Predicta TV's and see which
one is rolling. Can't have that. Haha!! They are all hooked up from a DVD player to VHF inputs on back
of the sets with splitters and adapters bought at Radio Shack.

The Stoner Cafe coffee machine has been around for close to 20 years. It's just a display. There's a high price on it to keep it from selling.

[FASTURN402]

We to had an antenna on a pole and had to turn it to the direction we needed. Later my dad put a motor on it with a box in the family room that had a dial.
We then simply turned the dial and it spun the antenna until the channel you were watching was "tuned in".
My dad was ahead of his time.
In the late sixties he took the chassis out of a 25 inch console tv.
Had a double closet in the master bedroom into which he cut a hole in one door, built a support in the closet, inserted chassis and trimmed with molding.
Wallah, the first wall mounted flat screen tv. 

[MoonDawg]

My dad was ahead of his time.
In the late sixties he took the chassis out of a 25 inch console tv.
Had a double closet in the master bedroom into which he cut a hole in one door, built a support in the closet, inserted chassis and trimmed with molding.
Wallah, the first wall mounted flat screen tv. 

     That's cool. What did he do for remote control?

[jholmgren]

Hi Jim:

Thanks for coming by. I'll have to check out my Philco Predicta TV's and see which
one is rolling. Can't have that. Haha!! They are all hooked up from a DVD player to VHF inputs on back
of the sets with splitters and adapters bought at Radio Shack.

The Stoner Cafe coffee machine has been around for close to 20 years. It's just a display. There's a high price on it to keep it from selling.

Thanks Jimmy - it was cool to walk around and see all of the booths.  The errant TV was in the soda fountain area, closest to the counter.   

I also really like your C-33.  I have added that one to my 'wish list' of machines, first one I've seen in person.

Jim