SMC Discussion Areas
July 02, 2024, 12:11:13 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Soda Machines, Coolers & Dispensers > Pre 60's Machines & Coolers (Moderators: johnieG, Jim) > How do I remove this thing? Ideal 55
Pages: [1] 2  All   Go Down
« previous next »
  Print  
Author Topic: How do I remove this thing? Ideal 55  (Read 6496 times)
0 Members and 2 Guests are viewing this topic.
mack65az
5 Cent Member
**
Offline Offline

Posts: 98

Collecting Ideal Sliders
« on: November 25, 2012, 09:45:59 pm »
Screws removed inside coin drawer and on hood. Not budgin'
Logged
MaineT
Soda Jerks
*****
Offline Offline

Posts: 1675
« Reply #1 on: November 25, 2012, 10:28:54 pm »
Did u take the flapper off?
Logged
Tim
Slapshot42
Soda Jerks
*****
Offline Offline

Posts: 2627


Jared
« Reply #2 on: November 25, 2012, 10:37:23 pm »
Try to shoot them with PB blaster and have the sit overnight.  You could just drill the screws out?    biggrin

But yes Tim is correct there is a very small screw that secures the flapper in place in can be removed with a small allen wrench.  Sounds like your screws are seized in the secure the coin mechanism cover.

Jared
« Last Edit: November 25, 2012, 10:39:22 pm by Slapshot42 » Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6224
« Reply #3 on: November 25, 2012, 11:34:49 pm »
      Remove coin drawer
      Remove 2 screws
      LIFT coin box cover off coin tower.
Logged
Glen
mack65az
5 Cent Member
**
Offline Offline

Posts: 98

Collecting Ideal Sliders
« Reply #4 on: November 26, 2012, 07:07:42 am »
Flapper was out as well. Two screws removed behind coin box and on tower cover. Tried to pull the chrome cover up, but it definitely feels like it's still connected to something.
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6224
« Reply #5 on: November 26, 2012, 09:28:44 am »
      A rubber mallet should work or place a piece of wood under it and hammer it upward. Someone may have tried to pry it off and bent it.
Logged
Glen
Slider-Bob
Soda Jerks
*****
Offline Offline

Posts: 1351
« Reply #6 on: November 26, 2012, 09:58:30 am »
I took a tall boy off a 55 this weekend and there were 3 screws behind the cash drawer holding it on the side of the slider.
Logged
Restored Coke 81D
Restored Pepsi, 7up VMC 81
Restored Popperette
Restored Wayne 60
mack65az
5 Cent Member
**
Offline Offline

Posts: 98

Collecting Ideal Sliders
« Reply #7 on: November 27, 2012, 05:21:03 pm »
I can pull it up about 1/2" and that's it. Something connected to the hood or at least it feels that way. I'll be a little more forcefull and hope for the best.
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6224
« Reply #8 on: November 27, 2012, 06:47:26 pm »
       It's only supposed to lift 1/2" to unlatch it, then it pulls off horizontally.
Logged
Glen
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5392


This is fine...everythings going to be OK....


WWW
« Reply #9 on: November 27, 2012, 07:41:15 pm »
no picture dude..please repost


 Please post photos!
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1] 2  All   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!