SMC Discussion Areas
November 22, 2024, 07:48:08 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Vending Mechanisms (Moderators: johnieG, Jim) > Vendo 110 crank handle getting stuck
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Vendo 110 crank handle getting stuck  (Read 7365 times)
0 Members and 1 Guest are viewing this topic.
brasskey
25 Cent Member
****
Offline Offline

Posts: 308
« on: November 23, 2011, 01:13:46 pm »
The crank handle on my Vendo 110 is getting stuck.  When I pull it down, it won't pop back up (I have to manually pull it up an inch or so to get it to pop back up).  Any ideas on what the problem might be or what I should look for? It worked fine for the first few months but just started acting up.
Logged
cokecolaman
Soda Jerks
*****
Offline Offline

Posts: 986
« Reply #1 on: November 23, 2011, 01:22:40 pm »
I would try it with the door open...if it works fine that way, you know it's probably not the coin mechanism. It could be the linkage needs adjusted or the bottle rack is getting gummed up and slowing it down. I'm sure someone here will be able to help you more, but I would try it with the door open first.
Logged
VMC Coke 88 (nice original)
VMC Pepsi 81
VMC Orange Crush 81
VMC Squirt 81
VMC Dr. Pepper 81
VMC RC 81
VMC 7up 81 st
Vendo 44 original
Jacobs 56 Pepsi
Cavalier 33
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom
« Reply #2 on: November 23, 2011, 06:29:18 pm »
First disconnect the linkage and try the mech without anything attached to it....then connect the linkage and with the door open try it again...then try it with the door closed.
If it fails the first test, then it is the mech....if it fails the second test, then I would suspect that you stuffed to much insulation around the linkage and it cannot move freely.....if it fails the third test, then you have an issue with the bottle stack.
Good Luck!
Logged
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
brasskey
25 Cent Member
****
Offline Offline

Posts: 308
« Reply #3 on: November 23, 2011, 07:57:15 pm »
Thank you. I tried all the scenarios you all recommended and it looks like the issue is with the bottle stack. Can I easily take this piece off and clean it up or is it a weekend project?
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom
« Reply #4 on: November 23, 2011, 10:51:34 pm »
Unscrew the nut on the back
Logged
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Cokemachinesandmore
Soda Jerks
*****
Offline Offline

Posts: 905
« Reply #5 on: November 25, 2011, 04:24:28 pm »
is that suppose to have a spring on it to help return the cup?
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom
« Reply #6 on: November 25, 2011, 08:19:45 pm »
Quote from: cokemachinesandmore on November 25, 2011, 04:24:28 pm
is that suppose to have a spring on it to help return the cup?

Yes it should - good eye!
Logged
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!