Vendo 56 decorator parts

[zadd]

I'm looking for the hinge pins and the bracket that holds the hinge side breaker strips .Or even a photo of the inner hinge side breaker bracket .  Let me know . Thanks

[zadd]

If anyone has one of these I just need a photo of what holds the breaker strips on the hinge side . Thanks

[Pat Pixley]

would a  plain Vendo 56 work ??

[zadd]

No . The cabinets are different . Anyone that has o e I just need a photo of where the interior door mounts . Thanks

[Ltransam]

  Zadd

 Let Me Check Mine In the Morning . I use one in the Garage (Removed The Inner Door ) For the GrandKids to get Glass Bottles From !!  And Pat & JohnnieG

[Pat Pixley]

Yes it worked just fine  .

[Ltransam]

 Hello, Zadd

                        Sorry But My Breaker Strips Are Sealed In Place

[zadd]

Thanks . So yours has a bracket holding the breaker strip then . Could you take a photo of that whole inner side Bracket. I have a bracket off a standard 56 I'm going to try and make it work .

[loman4ec]

I am not saying you are wrong in any way but that looks exactly like a regular V56. I have also had several decorators and I was under the impression that they were the same. I even sold a cabinet to someone once to use as a replacement for a rusted out V56 and said I would take it back if it didn't work and that was like 5 or 6 years ago and never heard back from him.

[zadd]

Cabinet is different . Its narrower and the hinges are on the other side . The liner is similar but bolt in differently . You could use a liner out of a regular 56 but might not fit like the origional but would work . The decorator has a interior door that hinged off the liner on the right side so the breaker bracket is different because of those hinges . I can cut and make bracket using a standard 56 bracket, but wanted to see what it looked like .