SMC Discussion Areas
November 27, 2024, 08:23:06 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: How to wire up new top fan motor on my C-51  (Read 9142 times)
0 Members and 1 Guest are viewing this topic.
oldcoke
5 Cent Member
**
Offline Offline

Posts: 66


« on: August 19, 2010, 10:07:00 am »

   When I got this Coke machine (C-51) it had no top fan. But the coke machine ran great and kept the cokes cold. Now I am going to order a new fan motor and blade but do not see how to wire it up. All the wires going up to where the fan goes are not for the fan?  Will the fan come with the wire to hook up somewhere on the machine? help
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #1 on: August 19, 2010, 10:31:17 am »

It should - are you getting the fan from one of the major suppliers?
The fan is supposed to run continuously, so it is hard-wired in the the wiring harness.
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
lonchaneyjr
Newbie
*
Offline Offline

Posts: 5


« Reply #2 on: August 19, 2010, 05:08:19 pm »

got mine from FUN_TRONICS. it has two wires. wired one to hot/black wire and the other to neutral/white wire of the power cord. didn't seem to matter which wire was wired to the hot or neutral as it is working great. since i am new at this someone may have a better idea. hope this helps. rudy
Logged
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768



« Reply #3 on: August 20, 2010, 10:02:09 am »

I may be wrong but I don't think the fan motor for the 51 is reproduced. I know it uses a different motor than other machines.
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #4 on: August 20, 2010, 10:30:17 am »

I may be wrong but I don't think the fan motor for the 51 is reproduced. I know it uses a different motor than other machines.

Fun-Tronics sells two versions:

http://www.fun-tronicsllc.com/store.php?crn=302&rn=613&action=show_detail

http://www.fun-tronicsllc.com/store.php?crn=302&rn=612&action=show_detail
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768



« Reply #5 on: August 20, 2010, 10:41:10 am »

I was not aware of that! Thank you Tom. I didn't know it was remade.
Logged
oldcoke
5 Cent Member
**
Offline Offline

Posts: 66


« Reply #6 on: August 21, 2010, 04:01:29 pm »

  Thanks for all the replays. I will be getting mine from Fun-Tronics. I am not ready for it at this time but will order when machine is done. Thanks again guys.
Logged
oldcoke
5 Cent Member
**
Offline Offline

Posts: 66


« Reply #7 on: August 21, 2010, 04:11:05 pm »


I am not sure which one I will need?? I have four small holes and one bigger hole in front where the motor goes for the fan blade and also three tabs on the outside. One at the top and one on each side on the back. Which one do I need? Also, does the blade where you tighen the screw go facing the front of the machine or to the rear? Thanks
« Last Edit: August 21, 2010, 04:18:18 pm by oldcoke » Logged
lonchaneyjr
Newbie
*
Offline Offline

Posts: 5


« Reply #8 on: August 21, 2010, 05:29:36 pm »

if you order from fun-tronics you will need part # 11C-1.the fan blade is part # 13C. I did not need to use the three tabs in the back. the blade will face the front of the machine when placing the screw. rudy.
Logged
oldcoke
5 Cent Member
**
Offline Offline

Posts: 66


« Reply #9 on: August 22, 2010, 08:16:24 am »

Thanks, did you have to take off the coke belt to get to the screw on the fan blade?
« Last Edit: August 22, 2010, 08:18:21 am by oldcoke » Logged
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!