SMC Discussion Areas
March 28, 2024, 04:45:36 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: Coin mech doa  (Read 30822 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: January 11, 2004, 02:15:15 pm »

Hello, totaly new to this.  Just picked up a Vendo H-90 that has a dead S75-9800A changer.  Coins fall into the coin return, does not buzz or do anyting.  Can someone point me into the right direction to troubleshoot the proplem?
Logged
Guest
« Reply #1 on: January 11, 2004, 07:14:17 pm »

'<img'> Took the changer apart and put it all back together.....BINGO, it has power.  Now How do you set the price?

S75-9800A  Two switches, each with two sliders for a total of 4
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #2 on: January 11, 2004, 07:23:29 pm »

Here ya' go!



Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #3 on: January 11, 2004, 07:27:48 pm »

And Here's the 9800B Coinswitches...Enjoy!  '<img'>
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Guest
« Reply #4 on: January 12, 2004, 09:34:37 am »

Thanks JohnieG.  I set up the price tabs and its dead.  I threw in five bucks worth of coins and the vend rack switch never energizes.  I looked back a few posts and learned it my be a B/O logic board or somthing to do with the changer not sending a signal to the machine.  Anyhow, thanks for the help.  I going to ebay to find a changer.

Vince
Logged
Pat Pixley
Guest
« Reply #5 on: March 17, 2004, 08:11:12 am »

Well if you plan on doing that , What are you going to do with
 the one that does not work .  I am looking for one .

 Let me know.
  Pat P.  '<img'>
Logged
Guest
« Reply #6 on: April 18, 2004, 09:56:02 pm »

Does cycle switch work? Got any low volts at power transformer. One machine I have, once door is opened, mech must be cycled. I only mess with these from time to time, last ones I repaired was at a factory and guy had bought new boards, trans, etc. Every swap produced different symptoms. All that was wrong was harness had opens at the bend point. All old stuff was fine. Good luck.
Logged
Guest
« Reply #7 on: November 22, 2004, 01:47:54 pm »

Wow , looks like my switch mech. The picture of the s75-9800B. Im new to this and will be quite needy to make this machine work. Vendo  V156-276. Dont know age or if works.
Logged
Guest
« Reply #8 on: March 14, 2006, 07:25:46 pm »

Bought a pepsi machine recently and its dated 1978 on the coin mech,is there anyway i can change the 25 cent price to 50 cent? its a choice vend machine,..can anyone tell me how? thnx
Logged
bubba
Soda Jerks
*****
Offline Offline

Posts: 3021



« Reply #9 on: March 14, 2006, 08:12:42 pm »

Hey newtopepsi... Welcome to the site...

Do you know what type of changer you have? Got any pics?
Logged

Ken

V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!