Title: Coin mech doa
Post by: on January 11, 2004, 02:15:15 pm
Hello, totaly new to this. Just picked up a Vendo H-90 that has a dead S75-9800A changer. Coins fall into the coin return, does not buzz or do anyting. Can someone point me into the right direction to troubleshoot the proplem?
Title: Coin mech doa
Post by: on January 11, 2004, 07:14:17 pm
Took the changer apart and put it all back together.....BINGO, it has power. Now How do you set the price?S75-9800A Two switches, each with two sliders for a total of 4
Title: Coin mech doa
Post by: johnieG on January 11, 2004, 07:23:29 pm
Here ya' go!
Title: Coin mech doa
Post by: johnieG on January 11, 2004, 07:27:48 pm
And Here's the 9800B Coinswitches...Enjoy!
Title: Coin mech doa
Post by: on January 12, 2004, 09:34:37 am
Thanks JohnieG. I set up the price tabs and its dead. I threw in five bucks worth of coins and the vend rack switch never energizes. I looked back a few posts and learned it my be a B/O logic board or somthing to do with the changer not sending a signal to the machine. Anyhow, thanks for the help. I going to ebay to find a changer.
Vince
Vince
Title: Coin mech doa
Post by: Pat Pixley on March 17, 2004, 08:11:12 am
Well if you plan on doing that , What are you going to do with
the one that does not work . I am looking for one .
Let me know.
Pat P.
the one that does not work . I am looking for one .
Let me know.
Pat P.
Title: Coin mech doa
Post by: on April 18, 2004, 09:56:02 pm
Does cycle switch work? Got any low volts at power transformer. One machine I have, once door is opened, mech must be cycled. I only mess with these from time to time, last ones I repaired was at a factory and guy had bought new boards, trans, etc. Every swap produced different symptoms. All that was wrong was harness had opens at the bend point. All old stuff was fine. Good luck.
Title: Coin mech doa
Post by: on November 22, 2004, 01:47:54 pm
Wow , looks like my switch mech. The picture of the s75-9800B. Im new to this and will be quite needy to make this machine work. Vendo V156-276. Dont know age or if works.
Title: Coin mech doa
Post by: on March 14, 2006, 07:25:46 pm
Bought a pepsi machine recently and its dated 1978 on the coin mech,is there anyway i can change the 25 cent price to 50 cent? its a choice vend machine,..can anyone tell me how? thnx
Title: Coin mech doa
Post by: bubba on March 14, 2006, 08:12:42 pm
Hey newtopepsi... Welcome to the site...
Do you know what type of changer you have? Got any pics?
Do you know what type of changer you have? Got any pics?
Title: Coin mech doa
Post by: on March 14, 2006, 08:41:02 pm
the machine is a choice vend,looks to be from the 70's, the coin mech is dated jul 10 1978 the manufactuer is coinco and the model number is S75-9800A,
Title: Coin mech doa
Post by: dr galaga on March 14, 2006, 08:55:17 pm
Look at the pics on the first page of this thread. The dip switch settings are there.
Title: Coin mech doa
Post by: on March 14, 2006, 09:06:15 pm
that one is a model S75-9800B mine is a S75-9800A, I see no settings on the outside of the coin mech,are they inside? or is this coin mech different from the on the first page of this thread,I am really new to the soda machine scene so you have to excuse me if i seem a liltle dumb,,lol.. where should i look for these little button settings? inside coin mech or outside?
Title: Coin mech doa
Post by: on March 14, 2006, 09:40:20 pm
I figured it out,thanks guys for all your help, This is a great site and im glad to be a part of it,a Big help....thnx again..
Title: Coin mech doa
Post by: on July 10, 2006, 04:06:07 pm
my changer lookes like the post by JohnieG. money just goes straight to coin return, no product. whats wrong? new to this please help