Condensor fan motor w/3 N 1

[USMC Vet]

If I am using a 3 n 1 starter where do I hook the condensor fan wires ? Thanks !            Tony

[90grad]

They need to get connected to the RUN and COMMON posts of the compressor, but so do the 3 N 1 wires.  What I do is connect the fan wires with the corresponding wires on the 3 N 1, so you have a two connectors with two wires in each.  Then, I make little "pigtails" to connect the spliced wire pairs to the compressor posts. 

[johnieG]

Simply wire the motor across the line input to the 3-in-1 booster, this will allow the fan to turn on along with the compressor.