Vendo 56 Value, in pieces

[Slapshot42]

You can manually push the solenoid to see if the stack works.  

If the lift gates move after pushing the solenoid in at the bottom of the stack you know you have a working bottle stack.  Than you can just take the solenoid off and bolt on a vending cam.  Can be done in about 15 mins.

As far at the coin mechanism missing that would be your biggest cost unless you can find a Vendo 110 for cheap or wait for 81 Transitional Machine.  Worst case scenario you could by a reproduction one from FunT.

I think realistically it's a $900-$1200 machine it's definitely a project.  The seller would be smart to re assembly it and make it look less like a project.

My .02 Cents,

Jared