|
Title: My first machine non-embossed 7-Up slider Post by: maxnew40 on June 23, 2015, 04:01:19 pm I just acquired my first soda machine!
It is an Ideal 55 (the tag just says 55 not 55A or 55B). It has the coin mech that doesn't stick up past the lid (is that the Frankenstein?). It also has only one lid stop in the middle instead of one on each end. I have gotten the coin mech working (it seems to have had a dime cam and a two nickle cam installed to make it 20 cents) and allowing one bottle to be removed. It is a little worn on the outside but the insides have almost zero rust. It is not cooling at this time. The fan and compressor are running (I did the rag int eh fan trick to see if the compressor was running and I heard on relay click and then the compressor vibrated and made a little bit of noise). I am just bit north of Seattle and I think I have found a person who can work on the cooling system. Title: Re: My first machine non-embossed 7-Up slider Post by: mygoose101 on June 23, 2015, 07:02:07 pm Welcome! Very cool first machine, actually very cool machine period. What are your plans for it? Leave it original or restore to a different flavor?
Title: Re: My first machine non-embossed 7-Up slider Post by: ld26 on June 23, 2015, 07:12:47 pm Congrats on the first! You'll have five more before you know what happened
Title: Re: My first machine non-embossed 7-Up slider Post by: Jim on June 23, 2015, 07:38:05 pm Welcome & congrats on the new addition ! ! !
Title: Re: My first machine non-embossed 7-Up slider Post by: HowDueYouDue on June 23, 2015, 08:39:36 pm Congrats. Careful they tend to multiple
Title: Re: My first machine non-embossed 7-Up slider Post by: Slapshot42 on June 23, 2015, 10:25:28 pm Welcome to the Site!
I'm 3 hours East of Seattle! Title: Re: My first machine non-embossed 7-Up slider Post by: maxnew40 on June 24, 2015, 10:03:06 am Welcome! Very cool first machine, actually very cool machine period. What are your plans for it? Leave it original or restore to a different flavor? I plan to leave it original, just clean it up some and get it cooling again. I have also have some old Atari Stand up games from the 80's. More pics attached. Can anyone tell me if this is the Frankenstein coin mech? Is there any availability of cams so that I could change the machine back to one dime and one nickle? -Max Title: Re: My first machine non-embossed 7-Up slider Post by: mygoose101 on June 24, 2015, 12:48:48 pm That is actually a Glasco mech. Not the right one for that machine but it is a nice looking mech because it's small and it will work.
Title: Re: My first machine non-embossed 7-Up slider Post by: maxnew40 on June 26, 2015, 09:48:35 am This machine is a little different from the pictures of other 55 I have seen. There is only one lid stop and it is in the middle. The pics I have seen all show two lid stops (there are no indications that there were ever two lid stops). I can't see any marks or anything to indicate that this was not the coin mech originally put on the machine. Makes you wonder what the history of this thing really is.
-Max Title: Re: My first machine non-embossed 7-Up slider Post by: MoonDawg on June 26, 2015, 10:02:12 am Is there any availability of cams so that I could change the machine back to one dime and one nickle? Cams stay the same, I learned from Tom that you need to remove the long screw that is holding the 2 lifter/locks together. Title: Re: My first machine non-embossed 7-Up slider Post by: Slapshot42 on June 26, 2015, 10:31:21 am They made one with only one lid stop I think it was like an "55 A " or something. ..
Title: Re: My first machine non-embossed 7-Up slider Post by: coke_and_stuff on June 26, 2015, 12:10:08 pm I've owned a few 55 sliders with just the one lid stop in the middle.
Title: Re: My first machine non-embossed 7-Up slider Post by: maxnew40 on June 29, 2015, 11:37:02 am Does anyone know of a person or company in the Seattle area that will work on the coolant systems of these old machines?
I live a few miles north of Seattle in Everett WA. -Max Title: Re: My first machine non-embossed 7-Up slider Post by: maxnew40 on July 01, 2015, 01:44:55 pm It looks like I have found a guy that can work on the cooling system in the Seattle area All Brands Refrigeration and Heating returned my email and said they can work on it but are three weeks out.
Progress at last! -Max Title: Re: My first machine non-embossed 7-Up slider Post by: Slapshot42 on July 01, 2015, 02:38:20 pm I would just take it there shop! A lot of those shops charge trip charges, etc. I would also get a general idea of cost .
I would order your own parts from one of the site sponsors and have the parts ready !! Jared |