SMC Discussion Areas

Hope someone here got it.. didn't last long on there...

http://www.ebay.com/itm/Vmc-81-Royal-Crown-Cola-Machine-/281649580089?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2047675.l2557&nma=true&si=9yDCE%252BGNnm7vzB0Vqkl7wzmep34%253D&orig_cvip=true&rt=nc

That went fast.....

The serial number is 102358   C 41  ... so what does that mean as far as what number it was in the line up of 200 thought to be made?

I bid on it and EBay cancelled my bid...

I've been trying to collect serial numbers on RC and 7up 81s, not an easy task and most people don't even respond to you when inquiring. I want to eventually put into a data base. All the numbers I have are above 200 and all end with C41.

That was a tough machine. I understand it was a RC but Glen and I were talking about it while still on auction.

He had a opening bid of $5,000 which means he knew what he had and there was a reserve meaning he wanted more then $5K. Understandable. I would also. Missing a large mech, large door, and the VMC bezel you are looking at $1,200-$1,500 more in just those 3 parts alone. You are never going to find a original yellow coin door and how the rest of the machine looks, straight but a little rough it would have to be restored.

Once you restore a RC unless it's for yourself or even then, everyone is always going to question if it's a true RC.

With that being said I would only invest in a RC if it was a nice original that didn't need to be restored because once you do I think it's worth less. 

Joey does that mean more than 200 produced in your opinion

I personally believe more than 200 were made but that's my opinion, as with many others I have talked to.

As far as a restored RC 81 being worth less. Its just like any rare antique item. Whether it be a 71 HEMI cuda, a 1907 Harley Davidson, or a rare Soda Machine. Over restored hurts it in my opinion and a documented correctly restored piece will command strong money. My RC 81 will eventually be restored, as it was painted years ago and done horribly. They were nice enough to even sand and prep the machine for me for the awesome paint job that they applied. I took it apart when I bought it, serviced it, cleaned it up and it makes a nice Garage Machine for the time being.

It sold for $6700 privately. eBay was only used for advertising. I believe a "newbie" member from SMC got it.

B.

         Interesting..............then someone paid approximately $6000.00 for an embossed RC 81 door?

That's what I was thinking Glen!

I would have paid that in a heartbeat.

Me to, oh wait I did..... But would do it again!

I don't think that is too bad if its short 1500 in parts than he paid 8200 for an original rc81, which sounds about right from what I've heard

The allusive rc 81.that happened quickly! !!

Mine actually ends with B41... which I have no idea the difference between a B or C 41... any idea?

What is your serial number?

 104 672 B41

Does not seem to be any rhyme or reason to the numbers

Serial tags were probably produced in bulk numbers.  When the machine was done a tag was put on.  If there was a pattern it would of been noticed by now??

Here's the rest of the RC story... first buyer didn't show and didn't call... So the seller called me and I ended up buying it!

B.

Awesome!!!! :happydrinkers: Going to a good home!

Anybody see pictures with the liner removed?

         I would be doubtfull only on a restored RC 81 as to originality. I would bet original door liner = original letters.

        Good job Bea!  :happydrinkers:

I wouldn't question the RC machine it's real, I looked at probably 10 pics of it last night and nothing jumped off at being made up.

The serial number falls right in with the others I have on record. When I get a dozen or so numbers I will post them. There is defenatly a pattern on the RC serial numbers.

Congrats brenda!!! Awesome

You lucky dog!  Good for you beayoung.

Glad to see it is in the smc family

Yes B, very cool. Good for you!

A logical sequence?

This was the picture he sent me...

B, the story I hear is you're flipping it.........

Who cares whoever buys it can do whatever they please with it!!!

You don't have to be so abrasive.

Ok.  Unless you've talked to Brenda so is your comment...

??? Not sure where you would have heard that... I guess that's how rumors get started!

B.

Oh, maybe it could of been....................um the seller !  :oh:

I'm not sure Ezra, but I haven't seen anyone stir the pot more than you...I'm not trying to be a jerk, but I really don't understand why you post some of the comments you do. I like this board and 99% of the people here are great and would bend over backwards for other members. I hope this includes you. I would also like to think you just have a different sense of humor that maybe I don't always get...

I think it's a pretty common technique used by people who didn't get there first to "poison the well" and put doubt in the seller's mind that perhaps they should not have sold it to the person they chose. They try to undo the deal that was made so they can buy it themselves. I have a pretty solid idea where this all came from and will take appropriate measures when this is all done.

I don't think it's a nice thing to do or the way I would choose to behave but I know it happens! I've learned in life that I can't control the behavior of others so I try to just move past that. Too many positive things in life to dwell on the negative!  

B.

Well said Brenda ! ! !

 is that a threat? You asked a question and received an answer.  if you don't like the answer that's your problem.

"stir the pot" really cokecolaman.....um, or is it answering a question.  But your post is all warm and fuzzy and I think everyone here loved it.

Is choosing not to talk to someone is a threat?  "Threat" seems like such a strong word to me. I think it's just a choice about who I choose to interact with.
Perspective,  Ezra, perspective.  :wow: I don't plan to hire a hitman or anything... LOL!

man Ezra you rub people the wrong way, lets not take away from this awesome purchase, congrats again Brenda, very happy for you!

I should rub people what way?

In a way that feels warm and friendly.  :smile:

Great Score BRENDA!!!

Its your machine!

Do what ever you want with it: restore it, smoker, BBQ, Gun Safe, whatever.

Yeah... that's it!  Gun safe...Great Idea. ROFL! :biggrin:

great score where is it coming from?

I don't need to as I have done nothing wrong.  I posted the information I had at the time from a credible source into if the machine was a flip and if so I was going to inquire into price and location.  I was then bombarded with odd/abrasive posts from Jared, Brenda , and cokecolaman

 I'm owed an apology from the three of you and I myself will be discussing your behavior/posts with the moderators and owner of this website.

Ha Ha!! Maybe you should call the police too! I think you must have a great sense of humor!

LOL :laugh:

People get what they deserve, if one doesn't like it, leave.....

Go ahead Brenda, act more ignorant on a public forum. It just proves my point.

Ray, provide some background please on what it is someone deserves and what they've done to deserve it. If youre capable.

Also, Ray please clarify what gives you the right to instruct someone to leave a public forum that you don't own.

Jim, in all your excitement to support Brenda did you do any research into what your were cheering her on for.  I would expect more from an administrator.

Jim, who is it that you report to/ assigned you as an administrator?

Do what ever you want with it: restore it, smoker, BBQ, Gun Safe, whatever.
[/quote]

Do people really turn them into smokers? I just spent two hours reasearching a new smoker for the season, popped on here to take a break, and saw the comment. Do they use a picnic cooler to make the offset firebox?

I like the smoker idea a lot, the more I think about it!

And Jim... Who do you report to??? If we weren't so busy watching the Badger game, I'd have a good belly laugh!

I have no right Ezra, but personally I'm just never in a place where I know I'm not wanted, but that's just me. 

Ray Im sure we all think its wonderful that you're such a well liked person with such a warm heart that you're wanted every where you go.

May I ask you to expand on your earlier comment of "people get what they deserve".

Thanks Ray

Erza...Jim is the owner of SMC, and can do as he pleases. That includes deleting access to members who continue to attempt to make a mockery of this site.
(hint, hint...I'm talking about you Ezra!).  Now take a chill pill, or we're gonna give you a "timeout" and make you sit in the corner!

 :happydrinkers: :happydrinkers: :happydrinkers: :happydrinkers:

yes, and making threatening statements can be reported to the police, traced to the IP address, and the FCC can shut a website down. are you aware of that slider? please reread your post and maybe you should relax. Im very relaxed.

I just re-read my post, and you confirmed it.  "Nobody puts Baby in the corner!"

        Bill, You and I have been friends for a long time and you know I have no beef with you personally.

        But insulting one or more members of our group has got me taking sides!            :darn:

        Please chill out?   :hopefull:

holy cow, how did me asking about a rc 81 being potentially flipped, so I might buy it,  turn into a huge food fight.  

Maybe you could take a class at your local community college about Self Awareness.

Ezra,

You didn't ASK "about a RC being potentially flipped" you said you heard it WAS being flipped. 

I'm pretty sure you can't buy it now, even if you wanted to.   LOL!!!

A fellow member buys a RC 81 and instead of us celebrating with her it turns to this. Truly a shame.

I think it was a great learning experience. 

       This sure looks like an original to me!  :happydrinkers:

Holy cow... I congratulate B for a killer machine... I go change out the old light fixture on the front porch cause my wife told me to (took forever) and return to this...
We should have this thread deleted...

She got a great machine.. she was in the right place at the right time... She loves this stuff and I'm glad she got it...
There's other machines and coolers waiting to be discovered... (course I didn't get to go looking cause I had to change out the light!)
But tomorrow is a new day please let's let all this go... and let's move on... Tomorrow is also Easter Hope you all have a great day
and enjoy/observe it.

See you folks Thursday night!

You sound a litle bitter about that light Eric!!! Lol!

Ha... well...I did promise and finally had a nice day... but with a older home nothing goes smoothly.. but it's finished and even working! So I can
cross that off the Honey Do list!  :happydrinkers:
 
Just ready to get out and look for stuff.. the winter seemed so long...

Sorry, I missed the party.  Bea congrats on your machine.  I was just reading this thread and my only question is what is the white thing in the picture of the machine with the cover off?  It looks like it's just paper.  I had a 110 apart once and it was just insulation and a ballast.

It was a good "party" to miss!  :laugh: Insulation on the inside of the door...

O.K. thanks.  Congrats again.

Joey, My 7up 81 serial number is 100064851.

Congratulations Brenda what a great find! !! First joey s then rods and now your rc 81. That's great that they are still turning up out there. Good luck everyone on the hunting and happy easter

Troy;
Is the 3rd last digit a 8 or is it a "B"

Here we are again, making assumptions, accusations and just plain childish talk about each other ! ! !
Personally, I resent having to waste time reviewing a complete topic start to finish; especially when I am traveling with limited internet access ! ! !

It was all too recently I expressed concerns at the direction SMC members have been treating each other!
While I may not have every detail behind the RC 81, it is apparent things went south between Slapshot and Ezra early on...
I can only ask you keep this forum moving in a positive direction while minimizing personal accusations and sarcasm!
Not meant to be misconstrued as a threat as some might think, but ultimately, it's up to our moderators & me to deal with issues like this!
Fortunately, we have only exercised discretion on one occasion and would rather not repeat for such trivial antics...

Anyone that has a problem with the Discussion Areas or me, do not hesitate to contact me ! ! !
End of Story...

Jared,
I am not pointing fingers; just my observation of the issue...

A perfect example of how things get misconstrued and misinterpreted...
As far as I am concerned, topic is dead!
We lost focus along the way that one of our members acquired a very elusive machine for their collection!
Any future concerns regarding this topic should be directed to me!