|
Title: What 9 PIN Coin Mech Can Be Set To Accept a Dime and a Penny - Total 11 cents ? Post by: vintagevendo on March 04, 2014, 03:07:02 pm Anyone know what Change Giving 9 PIN Coin Acceptor/Mechanism was used ... or could have been used in the early 1960's ( specifically 1961 ) ... that could be set up to accept ... One Dime and 1 Penny ... or 2 Nickels and One Penny - for a Total of 11 Cents
Anyone ever seen one Thanks Title: Re: What 9 PIN Coin Mech Can Be Set To Accept a Dime and a Penny - Total 11 cents ? Post by: Slider-Bob on March 04, 2014, 04:01:03 pm You forget to offer "I'm clueless" as one of your voting choices.
I'd bet that choice would get the most votes! Title: Re: What 9 PIN Coin Mech Can Be Set To Accept a Dime and a Penny - Total 11 cents ? Post by: HowDueYouDue on March 04, 2014, 08:18:28 pm Selected don't know but "I'm clueless" is more accurate for me as well.
Title: Re: What 9 PIN Coin Mech Can Be Set To Accept a Dime and a Penny - Total 11 cents ? Post by: vend_dr on March 04, 2014, 09:00:38 pm The NRI 5600 series coin mech took pennies and could be set to vend for 6, 7, 11 and 12 cents.
Title: Re: What 9 PIN Coin Mech Can Be Set To Accept a Dime and a Penny - Total 11 cents ? Post by: johnieG on March 04, 2014, 09:00:47 pm Westinghouse (select-o-matic series) shows an electric coinmech with a 1-Cent coin-switch.
Title: Re: What 9 PIN Coin Mech Can Be Set To Accept a Dime and a Penny - Total 11 cents ? Post by: MoonDawg on March 04, 2014, 09:27:49 pm Wow Johnie........you're good! :drinking:
Learn something new here all the time. Title: Re: What 9 PIN Coin Mech Can Be Set To Accept a Dime and a Penny - Total 11 cents ? Post by: tkaz on March 04, 2014, 10:53:19 pm vend_dr is right, the NRI 5600 series can be set for 6/7 cents or 11/12 cents depending on the slug rejector that is in it. I didn't know until it was mentioned and checked out the manual for it.
Title: Re: What 9 PIN Coin Mech Can Be Set To Accept a Dime and a Penny - Total 11 cents ? Post by: collecture on March 05, 2014, 08:19:21 am vend_dr is right, the NRI 5600 series can be set for 6/7 cents or 11/12 cents depending on the slug rejector that is in it. I didn't know until it was mentioned and checked out the manual for it. There are a few other parts that are needed besides just a PNDQ rejector. It has it's own dedicated CREM, which is usually not present anymore. Title: Re: What 9 PIN Coin Mech Can Be Set To Accept a Dime and a Penny - Total 11 cents ? Post by: mznb1u on March 05, 2014, 08:21:35 am Or you could set it for 10 cents and install a penny box! :happydrinkers: The things you can learn on this site. Great detective work guys.
:drinking: Tim :drinking: Title: Re: What 9 PIN Coin Mech Can Be Set To Accept a Dime and a Penny - Total 11 cents ? Post by: Blind1968 on March 05, 2014, 09:36:00 am The NRI 5600 series coin mech took pennies and could be set to vend for 6, 7, 11 and 12 cents. |