First machine

[Duane73]

 

[Duane73]

[Duane73]

[Duane73]

I need a new light switch...Can they be found??

[Duane73]

Other than the lights everything works great..It has a good bit of surface rust..What might I expect to pay for a paint job..

[bmw90w]

Congratulations! That is a nice looking machine. Surface rust is pretty common on these machines. If you want it to look brand new, a paint job can be pretty expensive with prep work etc. Personal preference really, but it doesn't look too bad.  A light switch can easily be found at any ace hardware store. It is just your basic micro switch. Take it in there and you can match it up.

[johnieG]

Nice V63, looks pretty straight, The light switch can also be found at Lowes hardware & HomeDepot stores, it is also refered to as a canopy switch. look down the eletrical supplies aisle.

also you might wish to double check to make sure it's not a bad lamp, starter or ballast, as for paint, I have a simular machine I'm having painted ( with a surface-rusty top like yours) I will run aprox. $400 with some light sandblasting to clean up the rust. you can save some money by preping it yourself if you know what you're doing body-work wise.