Selectivend Help

[Pat Pixley]

Ok I got my chrome & nickel plating back
Friday and have been work on that and
the honey do list ( which get longer    )
well anyways need some help need to look
at a wiring diagram mainly the wiring around
the bottle release solenoid,  And there is one
more thing I'm not getting power to my coin
mech.  Ill drop some photo's tomorrow if need
be .  I hate when things like this happen it
drive me nut.
 OH YEAH    I all most forgot  it's my
 Selectivend 64 Dr Pepper machine
 So any help would be great  Thanks.  '>

 Pat   '>

[johnieG]

start with the basics & check for power at pins #1 & #2 of the female jones socket, also make sure that you've re-connected the main harness connector that feed the door circuts.

[Pat Pixley]

<font color='#0000FF'>Thanks John, I checked the socket  no power at all
and at the wiring harness connector there is power
on just the one side and I've gone through
 and checked those connections those were tight.
and the wiring seem in good shape . The only thing
that keeps comming back up, when I broke this machine
down there was a white wire that ran on the inside
of the cabinet  that no one here saw before and passed
it off as a heating line , well I never did run that after
I got it back .
Pat  <!--emo&:O--><img src="http://soda-machines.com/iB_html/non-cgi//emoticons/wow.gif" border="0" valign="absmiddle" alt=':O'><!--endemo--></font>