vendo 126

[zadd]

I put new ballasts in the sign and it say to ground the ballast body, Some one before has changed it in the past and never put the gounds on? In the wiring inside the coin door theres a gound wire screwed to the box that run inside the wire loom that goes to the light and it has been cut. Do I just screw a ground wire to each ballast and then connect them together and then attatch it to little box inside the coin door?

[Kevin C]

Hello

If I remember correctly the new ballest should have a black & white wire only. The ballest should ground itself to the cabinet of the soda machine when you mount it.

Kevin

[zadd]

Thanks for the reply . With the three prong power cord I would say it will be fine. thanks