SMC Discussion Areas
November 23, 2024, 06:31:07 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Could this be the wrong relay box  (Read 5976 times)
0 Members and 1 Guest are viewing this topic.
Rickplayer
Guest
« on: July 08, 2006, 10:58:48 am »

I have gone through this whole machine over and over. It appears to operate properly, except for it won't stop running after you vend. I am wondering if this is possibly the wrong relay box as it says to use it only with vu-b and vu-c. My machine is a ecb c 9-72. Anyone?



Logged
dr galaga
Soda Jerks
*****
Offline Offline

Posts: 2346


Sorry, but it's a POP MACHINE!


WWW
« Reply #1 on: July 09, 2006, 04:53:58 pm »

Hang in there.  I know that hardly anyone has gotten to around to answer your questions but it is probably because hardly anyone here has a CV and the forum has been kind of slow the past month.
Have you tried to make a free-vend switch (first topic in the Coin Mech area)?  This way you can at least start to narrow it down and say that it is not the coin mech. '<img'>
Logged

Brent
--------------
Cavalier CS-80C
Vendo 63
--------------
The ultimate glass bottle soda site: www.GlassBottleSoda.org
My gameroom: Arcade80s.net
Rickplayer
Guest
« Reply #2 on: July 09, 2006, 06:26:34 pm »

Hi and thanks. Yes, I made a free vend switch. Same symptoms.
Logged
Rickplayer
Guest
« Reply #3 on: July 10, 2006, 05:48:28 pm »

WEll,
I got a hold of a service manual, but I dont think it is the correct one. I got the basic idea of how it works, but need parts. Does anyone have a relay box, choice vend part # 851574?
Logged
Rickplayer
Guest
« Reply #4 on: July 13, 2006, 09:19:45 pm »

Well,
I had a guy come out that works on vending machines. He said we are stuck without schematics. Also, it would be nice to have a replacement relay box, but noone has chimed in. I assume I am dead in the water.Sad
Logged
Jim
Administrator
Soda Jerks
*****
Offline Offline

Posts: 5880


#1 Soda Jerk!


WWW
« Reply #5 on: July 14, 2006, 10:54:20 am »

Jon,

I'm not knowledgeable on later models, but my observation on Choice Vend machines is it can be difficult to locate parts or someone experienced with them... Johnie has some knowledge on these...
Logged

My six cents,

Jim

Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!