SMC Discussion Areas
November 27, 2024, 01:04:58 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Vending Mechanisms (Moderators: johnieG, Jim) > 600 series
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: 600 series  (Read 4710 times)
0 Members and 1 Guest are viewing this topic.
dprat1
Guest
« on: January 15, 2006, 06:36:56 pm »
In process of restoring 600 series dual slug rejector for my C-51. There is a piece that appears to be bent and should not be? I have circled the piece in question. The protruding lever is slightly bent down at an angle. Not sure of the function but seems to me it should be pointing straight out at 90 degrees??
Thanks,
doug
Logged
MCarter
Soda Jerks
*****
Offline Offline

Posts: 1143
« Reply #1 on: January 15, 2006, 07:01:59 pm »
That piece is there to let the Coin  Mech. know if there is soda in the machine. It trips it when the machine is sold out. Hope this helps.
Logged
Matt



RC VMC - 81 Orignal
Vendo V-56 Two Tone Round Top ~~ Currently in use
Seeburg 100 G Jukebox ~~ Restored
Minit Pop Popcorn Machine ~~ Restored
Cavalier 55-D ~~ Restored
Rockola 1426 ~~ Orignal--- For Sale
Chicago Coin Band Box ~~~ Restored
dprat1
Guest
« Reply #2 on: January 15, 2006, 07:53:45 pm »
Matt,
I meant to post under "coin mechaniams". Think I must be in shock and depressed with the ball game today '<img'>  Oh well...they didn't deserve to win that one. I ran a coin through while holding the lever in, as if out of product, and the coin went straight through to coin return. So must be operating properly....will leave as is I guess. Thanks for the information.
doug
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!